Ilass Logo

ilass -EUROPE 2002

Zaragoza

18th Annual Conference on Liquid Atomization & Spray Systems

9th - 11th September 2002
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z <-BACK
 
A up

Abduljalil, Hassan M.
A NOVEL SPRAY CONFINEMENT TECHNIQUE FOR MEDICAL SPRAYS: DETAILED IVESTIGATIVE MEASUREMENTS OF SIX GEMETRICAL CONFIGURATIONS
Yusuf Al-Suleimani, Hassan M. Abduljalil and A. J. Yule
 
 Medical
A NOVEL SPRAY CONFINEMENT TECHNIQUE FOR MEDICAL SPRAYS: ADVANCED PROCESSING AND CORRELATION WITH TIMP MEASUREMENTS
Hassan M. Abduljalil, Yusuf Al-Suleimani and A. J. Yule
 
 Medical

Aísa, L.A.
DYNAMIC CHARACTERIZATION OF A PRESSURE SWIRL HOLLOW CONE SPRAY
J.L. Santolaya, L.A. Aísa, J.A. García, I. García Palacín
and E. Calvo
 
 Atomizer Design
INFLUENCE OF PARTICLE-PARTICLE COLLISIONS IN A ROUND JET LADEN WITH SOLIDS
Santiago Laín, J.A. García, L.A. Aísa and Martin Sommerfeld
 
 Droplet Collisions

Alajbegovic, A.
PRIMARY BREAK-UP MODEL FOR DIESEL JETS BASED ON LOCALLY RESOLVED FLOW FIELD IN THE INJECTION HOLE
E. v. Berg, A. Alajbegovic, D. Greif, A. Poredos,
R. Tatschl, E. Winklhofer and L.C. Ganippa
 
 Spray Modelling

Albina, F. O.
INVESTIGATION OF UNSTEADY EFFECTS IN PRESSURE SWIRL ATOMIZERS
Ernst von Lavante, U. Maatje and F. O. Albina
 
 Spray Modelling

Allocca, Luigi
EXPERIMENTAL STUDY OF A CR DIESEL SPRAY
Luigi Allocca, A. De Vita and L. Di Angelo
 
 Spray Impact on Walls

Allouis, C.
SIZING AND CHARACTERIZATION OF PARTICULATE EMISSIONS FROM HEAVY FUEL OIL SPRAY COMBUSTION
C. Allouis, B. Apicella, R. Barbella, F. Beretta and
A. Ciajolo
 
 Spray Combustion
ATOMIZATION AND COMBUSTION OF A SIMPLE ELECTROSPRAY
A. Cavaliere, Raffaele Ragucci, F. Beretta and C. Allouis
 
 Spray Combustion

Al-Suleimani, Yusuf
AN ALTERNATIVE SPRAY PRODUCTION METHOD FOR PRESSURIZED METERED DOSE INHALER
Yusuf Al-Suleimani and A. J. Yule
 
 Medical
A NOVEL SPRAY CONFINEMENT TECHNIQUE FOR MEDICAL SPRAYS: DETAILED IVESTIGATIVE MEASUREMENTS OF SIX GEMETRICAL CONFIGURATIONS
Yusuf Al-Suleimani, Hassan M. Abduljalil and A. J. Yule
 
 Medical
A NOVEL SPRAY CONFINEMENT TECHNIQUE FOR MEDICAL SPRAYS: ADVANCED PROCESSING AND CORRELATION WITH TIMP MEASUREMENTS
Hassan M. Abduljalil, Yusuf Al-Suleimani and A. J. Yule
 
 Medical
A CFD PREDICTION OF WAVE DEVELOPMENT AND DROPLET PRODUCTION ON SURFACE UNDER ULTRASONIC EXCITATION
Yusuf Al-Suleimani and A. J. Yule
 
 Ultrasonic

Alzuaga, S.
DROP SPRAYING USING A VIBRATING SURFACE UNDER INFLUENCE OF AN ELECTRIC FIELD
S. Alzuaga, J.F. Manceau and F. Bastien
 
 Posters

Amoresano, Amedeo
ANALYSIS OF DROPLETS FALLING ON HOT VERTICAL SURFACE
Amedeo Amoresano, G. Langella and C. Noviello
 
 Spray Impact on Walls

Aouina, Y.
NUMERICAL INVESTIGATION OF DROPLET HEATING, VAPORIZATION, AND IGNITION OF METHANOL AND LOX DROPLETS IN A CONVECTIVE FLOW FIELD
Y. Aouina, E. Gutheil, U. Maas, U. Riedel and J. Warnatz
 
 Cryogenic

Apicella, B.
SIZING AND CHARACTERIZATION OF PARTICULATE EMISSIONS FROM HEAVY FUEL OIL SPRAY COMBUSTION
C. Allouis, B. Apicella, R. Barbella, F. Beretta and
A. Ciajolo
 
 Spray Combustion

Araneo, Lucio
FLASH BOILING EFFECT ON SWIRLED INJECTOR SPRAY ANGLE
Lucio Araneo, K. Ben Slima and R. Dondé
 
 Engine Sprays

Arndt, Stefan
VAPORIZATION OF MULTICOMPONENT FUEL DROPLETS NUMERICAL AND EXPERIMENTAL EVALUATION
Kai Gartung, Stefan Arndt and Christian Seibel
 
 Engine Sprays

Assanis, Dennis N.
VALIDATION OF AN ENHANCED LIQUID SHEET ATOMISATION MODEL AGAINST QUANTITATIVE LASER DIAGNOSTIC MEASUREMENTS
Christos Chryssakis, Katherine D. Driscoll, Volker Sick and
Dennis N. Assanis
 
 Engine Sprays

Atthasit, A.
A RECTILINEAR DROPLET STREAM STUDY: DYNAMICAL AND THERMAL BEHAVIOR
A. Atthasit, G. Castanet, Y. Biscos, F. Lemoine and
G. Lavergne
 
 Posters

 
B up

Balachandran, W.
MOLECULAR DYNAMIC SIMULATION OF AN ELECTROHYDRODYNAMIC LIQUID JET
Tomoya Funakawa, M. Yamaguchi, H. Kumamaru, W. Balachandran and
Z. Huneiti
 
 Electrosprays

Baldi, Giancarlo
CFD MODELLING OF IMPACT AND SPREADING OF DROPLETS ON A SMOOTH SURFACE
Mirko Garbero, Marco Vanni and Giancarlo Baldi
 
 Spray Impact on Walls

Baltes, J.
INFLUENCE OF THROTTLE EFFECTS AT THE NEEDLE SEAT ON THE SPRAY CHARACTERISTICS OF A MULTIHOLE INJECTION NOZZLE
J. Stegemann, J. Seebode, J. Baltes, Carsten Baumgarten and
G.P. Merker
 
 Engine Sprays

Barbella, R.
SIZING AND CHARACTERIZATION OF PARTICULATE EMISSIONS FROM HEAVY FUEL OIL SPRAY COMBUSTION
C. Allouis, B. Apicella, R. Barbella, F. Beretta and
A. Ciajolo
 
 Spray Combustion

Bar-Kohany, T.
SPRAY FORMATION BY BI-COMPONENT LIQUID FLASHING: A THEORETICAL APPROACH
T. Bar-Kohany and E. Sher
 
 Spray Modelling

Barreras, Félix
PERFORMANCE OF INTERNAL MIXING AIR-ASSISTED NOZZLES FOR HEAVY FUEL OIL BURNERS
E. Lincheta, Jorge Barroso, J. Suárez, Félix Barreras and
Antonio Lozano
 
 Atomizer Design
THE INFLUENCE OF AIR CO-FLOW CHARACTERISTICS ON THE OSCILLATION OF A LIQUID SHEET
Christian Siegler, Antonio Lozano and Félix Barreras
 
 Sheet Instabilities

Barrero, Antonio
RECENT ADVANCES IN ELECTROATOMIZATION
Antonio Barrero, J. López-Herrera and I.G. Loscertales
 
 Invited Lectures

Barroso, Jorge
PERFORMANCE OF INTERNAL MIXING AIR-ASSISTED NOZZLES FOR HEAVY FUEL OIL BURNERS
E. Lincheta, Jorge Barroso, J. Suárez, Félix Barreras and
Antonio Lozano
 
 Atomizer Design

Bar-Ziv, E.
DRAG FORCE ON A HEATED SPHERE
D. Katoshevski, G. Ziskind, E. Mograbi and E. Bar-Ziv
 
 Posters

Bastien, F.
DROP SPRAYING USING A VIBRATING SURFACE UNDER INFLUENCE OF AN ELECTRIC FIELD
S. Alzuaga, J.F. Manceau and F. Bastien
 
 Posters

Bauckhage, K.
MELT ATOMIZATION BY HEATED GASES
H. Lohner, U. Fritsching and K. Bauckhage
 
 Metal Manufacturing

Baumgarten, Carsten
A NEW MODEL FOR CAVITATION INDUCED PRIMARY BREAK-UP OF DIESEL SPRAYS
Carsten Baumgarten, J. Stegemann and G.P. Merker
 
 Engine Sprays
INFLUENCE OF THROTTLE EFFECTS AT THE NEEDLE SEAT ON THE SPRAY CHARACTERISTICS OF A MULTIHOLE INJECTION NOZZLE
J. Stegemann, J. Seebode, J. Baltes, Carsten Baumgarten and
G.P. Merker
 
 Engine Sprays

Belotserkovski, M.A.
RHEOLOGICAL MODEL OF COMPOSITE SLIDING BEARING COMPRISING HARD COATING ON SOFT POLYMER INTERLAYER
M.V. Kireitseu, S.G. Yerakhavets, Ion Nemerenco, M. Istomin,
M.A. Belotserkovski and A. Fedaravichus
 
 Spray Deposition

Ben Slima, K.
FLASH BOILING EFFECT ON SWIRLED INJECTOR SPRAY ANGLE
Lucio Araneo, K. Ben Slima and R. Dondé
 
 Engine Sprays

Beretta, F.
SIZING AND CHARACTERIZATION OF PARTICULATE EMISSIONS FROM HEAVY FUEL OIL SPRAY COMBUSTION
C. Allouis, B. Apicella, R. Barbella, F. Beretta and
A. Ciajolo
 
 Spray Combustion
ATOMIZATION AND COMBUSTION OF A SIMPLE ELECTROSPRAY
A. Cavaliere, Raffaele Ragucci, F. Beretta and C. Allouis
 
 Spray Combustion

Berg, E. v.
PRIMARY BREAK-UP MODEL FOR DIESEL JETS BASED ON LOCALLY RESOLVED FLOW FIELD IN THE INJECTION HOLE
E. v. Berg, A. Alajbegovic, D. Greif, A. Poredos,
R. Tatschl, E. Winklhofer and L.C. Ganippa
 
 Spray Modelling

Bergstrand, Pär
THE INFLUENCE OF ORIFICE DIAMETER ON FLAME LIFT-OFF LENGTH
Pär Bergstrand, Michael Försth and Ingemar Denbratt
 
 Spray Combustion

Beushausen, Volker
PIV-INVESTIGATIONS OF INTERNAL SLIT NOZZLE FLOWS AND THEIR INFLUENCE ON LIQUID SHEET BREAKUP
Jochen Scholz, Karsten Roetmann and Volker Beushausen
 
 Spray Diagnostics

Biscos, Y.
A RECTILINEAR DROPLET STREAM STUDY: DYNAMICAL AND THERMAL BEHAVIOR
A. Atthasit, G. Castanet, Y. Biscos, F. Lemoine and
G. Lavergne
 
 Posters

Blaisot, Jean-Bernard
EXTERNAL AND INTERNAL BEHAVIOR OF THE NEAR FIELD DIESEL JET AT HIGH INJECTION PRESSURE : DUAL SOURCE VISUALIZATION AND A MULTIPLE ANGLES TOMOGRAPHIC EXPERIMENTS.
Jérôme Yon, Jean-Bernard Blaisot and Michel Ledoux
 
 Engine Sprays

Blei, S.
A STOCHASTIC DROPLET COLLISION MODEL WITH CONSIDERATION OF IMPACT EFFICIENCY
S. Blei, C. A. Ho and Martin Sommerfeld
 
 Droplet Collisions

Blokkeel, G.
AN EULERIAN MODEL TO IMPROVE THE PRIMARY BREAKUP MODELING OF ATOMIZING JET.
G. Blokkeel, X. Silvani, François-Xavier Demoulin and R. Borghi
 
 Spray Modelling

Bolle, L.
ULTRASONIC ATOMIZATION SPRAY ANALYSIS WITH A THREE-PARAMETER GENERALIZED GAMMA FUNCTION.
Christophe Dumouchel, Daniel Sindayihebura and L. Bolle
 
 Ultrasonic

Borghi, R.
AN EULERIAN MODEL TO IMPROVE THE PRIMARY BREAKUP MODELING OF ATOMIZING JET.
G. Blokkeel, X. Silvani, François-Xavier Demoulin and R. Borghi
 
 Spray Modelling

Bothe, Dieter
MODELLING AND SIMULATION OF THE DISINTEGRATION PROCESS IN AN ULTRASONIC STANDING WAVE ATOMIZER
Oliver Reipschläger, Dieter Bothe, Hans-Joachim Warnecke,
Burkhard Monien, Jan Prüss and Bernhard Weigand
 
 Ultrasonic
THE EFFECT OF NON-NEWTONIAN FLOW BEHAVIOUR ON BINARY DROPLET COLLISIONS: VOF-SIMULATION AND EXPERIMENTAL ANALYSIS
Michael Motzigemba, Norbert Roth, Dieter Bothe,
Hans-Joachim Warnecke, Jan Prüss, K. Wielage and Bernhard Weigand
 
 Droplet Collisions

Branam, R.
INJECTION CHARACTERISTICS ON THE SURFACE OF A LIQUID JET IN A WIND TUNNEL
R. Branam, M. Hammou, A. Volpp and W. Mayer
 
 Posters

Brenn, Günter
SPRAY FORMATION THROUGH LIQUID SHEET BREAK-UP CONTROLLED BY VIBRATIONAL EXCITATION
Günter Brenn, Z. Prebeg and A.L. Yarin
 
 Sheet Instabilities

Broll, Peter
LAMELLA DISINTEGRATION AT SHEET FORMING NOZZLES, ESTIMATES FOR DROP SIZES
Peter Walzel and Peter Broll
 
 Sheet Instabilities

Burger, Matthias
A MULTI-COMPONENT DROPLET EVAPORATION MODEL FOR REAL AVIATION FUELS AT ELEVATED PRESSURES
Matthias Burger, Roland Schmehl, P. Prommersberger, O. Schaefer,
R. Koch and S. Wittig
 
 Gas Turbines

 
C up

Calvo, E.
DYNAMIC CHARACTERIZATION OF A PRESSURE SWIRL HOLLOW CONE SPRAY
J.L. Santolaya, L.A. Aísa, J.A. García, I. García Palacín
and E. Calvo
 
 Atomizer Design

Carreau, Jean Louis
LIQUID ATOMIZATION BY ANNULAR SWIRLING GAS
Arnaud Dunand, Remy Sorin, Jean Louis Carreau and
Francis Roger
 
 Fundamentals of Break Up

Castanet, G.
A RECTILINEAR DROPLET STREAM STUDY: DYNAMICAL AND THERMAL BEHAVIOR
A. Atthasit, G. Castanet, Y. Biscos, F. Lemoine and
G. Lavergne
 
 Posters

Cavaliere, A.
IDENTIFICATION OF CROSS-FLOW LIQUID-JET STRUCTURES BY MEANS OF STATISTICAL IMAGE EVALUATION
Raffaele Ragucci and A. Cavaliere
 
 Spray Diagnostics
ATOMIZATION AND COMBUSTION OF A SIMPLE ELECTROSPRAY
A. Cavaliere, Raffaele Ragucci, F. Beretta and C. Allouis
 
 Spray Combustion

Champoussin, Jean-Claude
CHARACTERISATION OF HIGH PRESSURE DIESEL FUEL SPRAYS BY ENTROPIC EDGE DETECTION
Pedro Luis Luque Escamilla, Jérôme Seneschal,
Juan Francisco Gómez Lopera, Christophe Ducottet,
José Martínez Aroza and Jean-Claude Champoussin
 
 Spray Diagnostics

Chauveau, C.
STUDIES ON THE EFFECT OF AIR TEMPERATURE ON LEAN PREMIXED PREVAPORISED TURBULENT SPRAY FLAMES
Cécile Pichard, C. Chauveau and I. Gökalp
 
 Spray Combustion

Chaves, Humberto
IMAGING OF CAVITATION, HOLLOW JETS AND JET BRANCHING AT LOW LIFT IN A REAL SIZE VCO NOZZLE
R. Miranda, Humberto Chaves and F. Obermeier
 
 Engine Sprays
BUBBLE PRODUCTION OCCURRING ON THE PERIODIC IMPACT OF VISCOUS DROPS
P. L. Torres Sanchez, Humberto Chaves and F. Obermeier
 
 Spray Impact on Walls

Chávez, A.
INTERNAL FLOW IN A Y-JET ATOMISER ---NUMERICAL MODELLING---
Zoili Tapia-Ramirez and A. Chávez
 
 Atomizer Design

Chigier, N.
DEPOSITION OF PARTICLES IN THE UPPER RESPIRATORY TRACT
Tevfik Gemci, B. Shortall, T.E. Corcoran and N. Chigier
 
 Medical
SPRAY CHARACTERIZATION FOR FLUIDIZED BED GRANULATION PROCESSES
Tevfik Gemci, N. Chigier, P.P. Godbole and P. Strickland
 
 Medical
DETERMINATION OF INDIVIDUAL DROPLET CHARGE IN ELECTROSPRAYS FROM PDPA MEASUREMENTS
Tevfik Gemci, R. Hitron and N. Chigier
 
 Electrosprays

Chryssakis, Christos
VALIDATION OF AN ENHANCED LIQUID SHEET ATOMISATION MODEL AGAINST QUANTITATIVE LASER DIAGNOSTIC MEASUREMENTS
Christos Chryssakis, Katherine D. Driscoll, Volker Sick and
Dennis N. Assanis
 
 Engine Sprays

Ciajolo, A.
SIZING AND CHARACTERIZATION OF PARTICULATE EMISSIONS FROM HEAVY FUEL OIL SPRAY COMBUSTION
C. Allouis, B. Apicella, R. Barbella, F. Beretta and
A. Ciajolo
 
 Spray Combustion

Coney, M
ISOTHERMAL COMPRESSION BY DENSE WATER SPRAYS IN A RECIPROCATING PISTON COMPRESSOR
P L Stephenson, A. Malmgren, M Coney, R. A. Huxley and
R. A. Richards
 
 Engine Sprays

Corcoran, T.E.
DEPOSITION OF PARTICLES IN THE UPPER RESPIRATORY TRACT
Tevfik Gemci, B. Shortall, T.E. Corcoran and N. Chigier
 
 Medical

Cossali, G.E.
SECONDARY DROPLET ATOMISATION FROM SINGLE DROP IMPACTS ON HEATED SURFACES
G.E. Cossali, M. Marengo, M. Santini and J. Watanabe
 
 Spray Impact on Walls
COMPARISON OF FRONT-TRACKING AND FRONT-CAPTURING COMPUTATIONS WITH EXPERIMENTAL DATA OF DROPLET IMPACT ONTO SHALLOW LIQUID POOLS
Yannis Hardalupas, H. Pergamalis, A.M.K.P. Taylor, G.E. Cossali
and M. Marengo
 
 Spray Impact on Walls

Cousin, J.
RELATIONS BETWEEN INTERNAL FLOW STRUCTURES AND DISINTEGRAZTION PROCESSES IN SPRAY FORMATION.
K. Triballier, J. Cousin and Christophe Dumouchel
 
 Engine Sprays

 
D up

Date, Kenji
ANALYSIS OF SWIRL INJECTION CHARACTERISTICS
Masaaki Kato, Kenji Date, Kazutoshi Koie and Takio Oya
 
 Spray Modelling

Demoulin, François-Xavier
AN EULERIAN MODEL TO IMPROVE THE PRIMARY BREAKUP MODELING OF ATOMIZING JET.
G. Blokkeel, X. Silvani, François-Xavier Demoulin and R. Borghi
 
 Spray Modelling

Denbratt, Ingemar
THE INFLUENCE OF ORIFICE DIAMETER ON FLAME LIFT-OFF LENGTH
Pär Bergstrand, Michael Försth and Ingemar Denbratt
 
 Spray Combustion

de Vega, M.
SENSITIVITY TO OPTICAL NOISE OF THE MEASUREMENTS OF CONCENTRATION AND VOLUME FLUX WITH A PHASE DOPPLER PARTICLE ANALYZER IN DILUTE AND DENSE SPRAYS
E. Palacios, A. Lecuona, M. de Vega and P. Rodríguez
 
 Spray Diagnostics

De Vita, A.
EXPERIMENTAL STUDY OF A CR DIESEL SPRAY
Luigi Allocca, A. De Vita and L. Di Angelo
 
 Spray Impact on Walls

Di Angelo, L.
EXPERIMENTAL STUDY OF A CR DIESEL SPRAY
Luigi Allocca, A. De Vita and L. Di Angelo
 
 Spray Impact on Walls

Domann, Roland
PLANAR DROPLET SIZING FOR QUANTIFICATION OF SPRAY UNSTEADINESS
Roland Domann and Yannis Hardalupas
 
 Spray Diagnostics

Domnick, Joachim
SIMULATION OF THE SPRAY COATING PROCESS USING A PNEUMATIC ATOMIZER
Q. Ye, Joachim Domnick and E. Khalifa
 
 Spray Deposition

Dondé, R.
FLASH BOILING EFFECT ON SWIRLED INJECTOR SPRAY ANGLE
Lucio Araneo, K. Ben Slima and R. Dondé
 
 Engine Sprays

Dopler, Martin
INFLUENCE OF THE GEOMETRICAL ARRANGEMENT OF THE PHASE CONTACT ON OPERATING CONDITIONS OF INTERNAL MIXING ATOMIZERS
Martin Dopler, Christian Weiss and Werner Kepplinger
 
 Posters

Dorr, G.
PERFORMANCE OF HYDRAULIC AND ROTARY ATOMISERS FOR MOSQUITO SPRAYING
A.J. Hewitt, W. Jany, N. Woods, G. Dorr and Clive Tuck
 
 Agricultural

Driscoll, Katherine D.
VALIDATION OF AN ENHANCED LIQUID SHEET ATOMISATION MODEL AGAINST QUANTITATIVE LASER DIAGNOSTIC MEASUREMENTS
Christos Chryssakis, Katherine D. Driscoll, Volker Sick and
Dennis N. Assanis
 
 Engine Sprays

Ducottet, Christophe
CHARACTERISATION OF HIGH PRESSURE DIESEL FUEL SPRAYS BY ENTROPIC EDGE DETECTION
Pedro Luis Luque Escamilla, Jérôme Seneschal,
Juan Francisco Gómez Lopera, Christophe Ducottet,
José Martínez Aroza and Jean-Claude Champoussin
 
 Spray Diagnostics

Dumouchel, Christophe
RELATIONS BETWEEN INTERNAL FLOW STRUCTURES AND DISINTEGRAZTION PROCESSES IN SPRAY FORMATION.
K. Triballier, J. Cousin and Christophe Dumouchel
 
 Engine Sprays
ULTRASONIC ATOMIZATION SPRAY ANALYSIS WITH A THREE-PARAMETER GENERALIZED GAMMA FUNCTION.
Christophe Dumouchel, Daniel Sindayihebura and L. Bolle
 
 Ultrasonic

Dunand, Arnaud
LIQUID ATOMIZATION BY ANNULAR SWIRLING GAS
Arnaud Dunand, Remy Sorin, Jean Louis Carreau and
Francis Roger
 
 Fundamentals of Break Up

 
E up

Edirisinghe, M.J.
CERAMIC FORMING BY ELECTROSTATIC ATOMIZATION
Suwan Jayasinghe and M.J. Edirisinghe
 
 Spray Deposition

Eggers, R.
DISINTEGRATION OF LIQUID PHASES IN PRESSURIZED GASES - INFLUENCE OF MASS TRANSFER
Matthias Hobbie and R. Eggers
 
 Fundamentals of Break Up

 
F up

Faeth, Gerard M.
DYNAMICS OF SECONDARY DROP BREAKUP -- A RATE-CONTROLLING PROCESS IN DENSE SPRAYS.
Gerard M. Faeth
 
 Invited Lectures

Fahlenkamp, Hans
OPTIMISATION OF THE WET FLUE GAS CLEANING PROCESS THROUGH MODELLING THE USE OF DROPLET INTERACTIONS IN OVERLAPPING SPRAYS
Ruth Kaesemann, Joachim Neumann and Hans Fahlenkamp
 
 Droplet Collisions

Fedaravichus, A.
RHEOLOGICAL MODEL OF COMPOSITE SLIDING BEARING COMPRISING HARD COATING ON SOFT POLYMER INTERLAYER
M.V. Kireitseu, S.G. Yerakhavets, Ion Nemerenco, M. Istomin,
M.A. Belotserkovski and A. Fedaravichus
 
 Spray Deposition

Försth, Michael
A SURVEY OF MODEL FUEL MIXTURES SUITABLE FOR EXCIPLEX-SPECTROSCOPY FOR LIQUID/VAPOR VISUALIZATION
Fredrik Persson, Michael Försth and Arne Rosén
 
 Spray Diagnostics
THE INFLUENCE OF ORIFICE DIAMETER ON FLAME LIFT-OFF LENGTH
Pär Bergstrand, Michael Försth and Ingemar Denbratt
 
 Spray Combustion

Founti, M.
DIESEL SPRAY EVAPORATION MODELLING IN A "COOL FLAME" ENVIRONMENT: A NOVEL APPROACH
D. Kolaitis and M. Founti
 
 Gas Turbines

Fritsching, U.
MELT ATOMIZATION BY HEATED GASES
H. Lohner, U. Fritsching and K. Bauckhage
 
 Metal Manufacturing

Funakawa, Tomoya
MOLECULAR DYNAMIC SIMULATION OF AN ELECTROHYDRODYNAMIC LIQUID JET
Tomoya Funakawa, M. Yamaguchi, H. Kumamaru, W. Balachandran and
Z. Huneiti
 
 Electrosprays

 
G up

Ganippa, L.C.
PRIMARY BREAK-UP MODEL FOR DIESEL JETS BASED ON LOCALLY RESOLVED FLOW FIELD IN THE INJECTION HOLE
E. v. Berg, A. Alajbegovic, D. Greif, A. Poredos,
R. Tatschl, E. Winklhofer and L.C. Ganippa
 
 Spray Modelling

Garbero, Mirko
CFD MODELLING OF IMPACT AND SPREADING OF DROPLETS ON A SMOOTH SURFACE
Mirko Garbero, Marco Vanni and Giancarlo Baldi
 
 Spray Impact on Walls

García, J.A.
DYNAMIC CHARACTERIZATION OF A PRESSURE SWIRL HOLLOW CONE SPRAY
J.L. Santolaya, L.A. Aísa, J.A. García, I. García Palacín
and E. Calvo
 
 Atomizer Design
INFLUENCE OF PARTICLE-PARTICLE COLLISIONS IN A ROUND JET LADEN WITH SOLIDS
Santiago Laín, J.A. García, L.A. Aísa and Martin Sommerfeld
 
 Droplet Collisions

García Palacín, I.
DYNAMIC CHARACTERIZATION OF A PRESSURE SWIRL HOLLOW CONE SPRAY
J.L. Santolaya, L.A. Aísa, J.A. García, I. García Palacín
and E. Calvo
 
 Atomizer Design

Gartung, Kai
VAPORIZATION OF MULTICOMPONENT FUEL DROPLETS NUMERICAL AND EXPERIMENTAL EVALUATION
Kai Gartung, Stefan Arndt and Christian Seibel
 
 Engine Sprays

Gemci, Tevfik
DEPOSITION OF PARTICLES IN THE UPPER RESPIRATORY TRACT
Tevfik Gemci, B. Shortall, T.E. Corcoran and N. Chigier
 
 Medical
SPRAY CHARACTERIZATION FOR FLUIDIZED BED GRANULATION PROCESSES
Tevfik Gemci, N. Chigier, P.P. Godbole and P. Strickland
 
 Medical
DETERMINATION OF INDIVIDUAL DROPLET CHARGE IN ELECTROSPRAYS FROM PDPA MEASUREMENTS
Tevfik Gemci, R. Hitron and N. Chigier
 
 Electrosprays

Giroud-Garapon, Stephane
EXPERIMENTAL AND NUMERICAL STUDY OF THIN WALL LIQUID FILM SPREADING ON A HEATING SURFACE.
Stephane Giroud-Garapon, G. Heid, G. Lavergne and O. Simonin
 
 Spray Impact on Walls

Godbole, P.P.
SPRAY CHARACTERIZATION FOR FLUIDIZED BED GRANULATION PROCESSES
Tevfik Gemci, N. Chigier, P.P. Godbole and P. Strickland
 
 Medical

Gökalp, I.
STUDIES ON THE EFFECT OF AIR TEMPERATURE ON LEAN PREMIXED PREVAPORISED TURBULENT SPRAY FLAMES
Cécile Pichard, C. Chauveau and I. Gökalp
 
 Spray Combustion

Gómez Lopera, Juan Francisco
CHARACTERISATION OF HIGH PRESSURE DIESEL FUEL SPRAYS BY ENTROPIC EDGE DETECTION
Pedro Luis Luque Escamilla, Jérôme Seneschal,
Juan Francisco Gómez Lopera, Christophe Ducottet,
José Martínez Aroza and Jean-Claude Champoussin
 
 Spray Diagnostics

Gordillo, J.M.
THE EFFECT OF THE DIAMETER RATIO ON THE ABSOLUTE AND CONVECTIVE INSTABILITY OF FREE, COFLOWING JETS
A. Sevilla, Carlos Martínez-Bazán and J.M. Gordillo
 
 Fundamentals of Break Up

Greif, D.
PRIMARY BREAK-UP MODEL FOR DIESEL JETS BASED ON LOCALLY RESOLVED FLOW FIELD IN THE INJECTION HOLE
E. v. Berg, A. Alajbegovic, D. Greif, A. Poredos,
R. Tatschl, E. Winklhofer and L.C. Ganippa
 
 Spray Modelling

Groom, Sascha
SAMPLE INTRODUCTION IN ATOMIC EMISSION SPECTROMETRY (AES). DIFFERENT PNEUMATIC NEBULIZERS AT COMPARABLE OPERATING CONDITIONS
Sascha Groom, H. Wiggers and Peter Walzel
 
 Atomizer Design
SPRAY DRYING OF SUSPENSIONS USING FLASH-EVAPORATION
Karsten Monse, Tanja Linnepe, Sascha Groom and Peter Walzel
 
 Posters

Gurliat, O.
INFLUENCE OF J AND WE NUMBER ON GH2/LOX IGNITION PROCESS
V. Schmidt, O. Gurliat, M. Oschwald and Oskar J. Haidn
 
 Cryogenic

Gutheil, E.
NUMERICAL INVESTIGATION OF DROPLET HEATING, VAPORIZATION, AND IGNITION OF METHANOL AND LOX DROPLETS IN A CONVECTIVE FLOW FIELD
Y. Aouina, E. Gutheil, U. Maas, U. Riedel and J. Warnatz
 
 Cryogenic

 
H up

Haidn, Oskar J.
INFLUENCE OF J AND WE NUMBER ON GH2/LOX IGNITION PROCESS
V. Schmidt, O. Gurliat, M. Oschwald and Oskar J. Haidn
 
 Cryogenic

Hammou, M.
INJECTION CHARACTERISTICS ON THE SURFACE OF A LIQUID JET IN A WIND TUNNEL
R. Branam, M. Hammou, A. Volpp and W. Mayer
 
 Posters

Hansen, Kim Granly
A COMPUTATIONAL AND EXPERIMENTAL STUDY OF THE INTERNAL FLOW IN A SCALED PRESSURE-SWIRL ATOMIZER
Kim Granly Hansen, Jesper Madsen, Chinh Minh Trinh,
Claus H. Ibsen, Tron Solberg and Bjorn H. Hjertager
 
 Atomizer Design

Hardalupas, Yannis
COMPARISON OF FRONT-TRACKING AND FRONT-CAPTURING COMPUTATIONS WITH EXPERIMENTAL DATA OF DROPLET IMPACT ONTO SHALLOW LIQUID POOLS
Yannis Hardalupas, H. Pergamalis, A.M.K.P. Taylor, G.E. Cossali
and M. Marengo
 
 Spray Impact on Walls
PLANAR DROPLET SIZING FOR QUANTIFICATION OF SPRAY UNSTEADINESS
Roland Domann and Yannis Hardalupas
 
 Spray Diagnostics

Hargrave, G.K.
NEAR-ORIFICE SPRAY AND VALVE FLOW REGIME OF A PHARMACEUTICAL PRESSURISED METERED DOSE INHALER
H.K. Versteeg and G.K. Hargrave
 
 Medical

Härtel, C.
SPRAY INTERACTION AND DROPLET COALESCENCE IN TURBULENT AIR-FLOW. AN EXPERIMENTAL STUDY WITH APPLICATION TO GAS TURBINE HIGH FOGGING.
S. Savic, G. Mitsis, C. Härtel, S. Khaidarov and P. Pfeiffer
 
 Gas Turbines

Hase, M.
TRANSIENT 3D SIMULATION OF HEAT TRANSFER FROM SPHERICAL AND STRONGLY DEFORMED DROPLETS AT HIGH REYNOLDS NUMBERS
M. Hase and Bernhard Weigand
 
 Spray Modelling

Heid, G.
EXPERIMENTAL AND NUMERICAL STUDY OF THIN WALL LIQUID FILM SPREADING ON A HEATING SURFACE.
Stephane Giroud-Garapon, G. Heid, G. Lavergne and O. Simonin
 
 Spray Impact on Walls

Heitkamp, M.
PRODUCING MONOSIZED DROPLETS BY VIBRATIONAL EXCITATED PNEUMATIC NOZZLES
Tanja Linnepe, M. Heitkamp and Peter Walzel
 
 Posters

Heukelbach, K.
INFLUENCE OF TURBULENCE ON THE STABILITY OF LIQUID SHEETS
K. Heukelbach, S. Jakirlic, R. Nakic and Cam Tropea
 
 Sheet Instabilities

Hewitt, A.J.
PERFORMANCE OF HYDRAULIC AND ROTARY ATOMISERS FOR MOSQUITO SPRAYING
A.J. Hewitt, W. Jany, N. Woods, G. Dorr and Clive Tuck
 
 Agricultural

Hitron, R.
DETERMINATION OF INDIVIDUAL DROPLET CHARGE IN ELECTROSPRAYS FROM PDPA MEASUREMENTS
Tevfik Gemci, R. Hitron and N. Chigier
 
 Electrosprays

Hjertager, Bjorn H.
A COMPUTATIONAL AND EXPERIMENTAL STUDY OF THE INTERNAL FLOW IN A SCALED PRESSURE-SWIRL ATOMIZER
Kim Granly Hansen, Jesper Madsen, Chinh Minh Trinh,
Claus H. Ibsen, Tron Solberg and Bjorn H. Hjertager
 
 Atomizer Design

Hobbie, Matthias
DISINTEGRATION OF LIQUID PHASES IN PRESSURIZED GASES - INFLUENCE OF MASS TRANSFER
Matthias Hobbie and R. Eggers
 
 Fundamentals of Break Up

Ho, C. A.
A STOCHASTIC DROPLET COLLISION MODEL WITH CONSIDERATION OF IMPACT EFFICIENCY
S. Blei, C. A. Ho and Martin Sommerfeld
 
 Droplet Collisions

Hodson, D.
NEAR-ORIFICE PDA MEASUREMENTS AND ATOMISATION MECHANISM OF A PHARMACEUTICAL PRESSURISED METERED DOSE INHALER
G. Wigley, H.K. Versteeg and D. Hodson
 
 Medical

Huneiti, Z.
MOLECULAR DYNAMIC SIMULATION OF AN ELECTROHYDRODYNAMIC LIQUID JET
Tomoya Funakawa, M. Yamaguchi, H. Kumamaru, W. Balachandran and
Z. Huneiti
 
 Electrosprays

Huxley, R. A.
ISOTHERMAL COMPRESSION BY DENSE WATER SPRAYS IN A RECIPROCATING PISTON COMPRESSOR
P L Stephenson, A. Malmgren, M Coney, R. A. Huxley and
R. A. Richards
 
 Engine Sprays

 
I up

Ibsen, Claus H.
A COMPUTATIONAL AND EXPERIMENTAL STUDY OF THE INTERNAL FLOW IN A SCALED PRESSURE-SWIRL ATOMIZER
Kim Granly Hansen, Jesper Madsen, Chinh Minh Trinh,
Claus H. Ibsen, Tron Solberg and Bjorn H. Hjertager
 
 Atomizer Design

Ineichen, B.
DETECTION OF NONSPHERICAL DROPLETS OF INJECTION SPRAYS IN A HIGH PRESSURE - HIGH TEMPERATURE CELL
B. Ineichen
 
 Spray Diagnostics

Istomin, M.
RHEOLOGICAL MODEL OF COMPOSITE SLIDING BEARING COMPRISING HARD COATING ON SOFT POLYMER INTERLAYER
M.V. Kireitseu, S.G. Yerakhavets, Ion Nemerenco, M. Istomin,
M.A. Belotserkovski and A. Fedaravichus
 
 Spray Deposition

 
J up

Jakirlic, S.
INFLUENCE OF TURBULENCE ON THE STABILITY OF LIQUID SHEETS
K. Heukelbach, S. Jakirlic, R. Nakic and Cam Tropea
 
 Sheet Instabilities

Jany, W.
PERFORMANCE OF HYDRAULIC AND ROTARY ATOMISERS FOR MOSQUITO SPRAYING
A.J. Hewitt, W. Jany, N. Woods, G. Dorr and Clive Tuck
 
 Agricultural

Jayasinghe, Suwan
CERAMIC FORMING BY ELECTROSTATIC ATOMIZATION
Suwan Jayasinghe and M.J. Edirisinghe
 
 Spray Deposition

Jedelsky, Jan
INFLUENCE OF SOME GEOMETRICAL PARAMETERS ON THE CHARACTERISTICS OF EFFERVESCENT ATOMIZATION
Miroslav Jicha, Jan Jedelsky, Jan Otahal and Jaroslav Slama
 
 Atomizer Design

Jicha, Miroslav
INFLUENCE OF SOME GEOMETRICAL PARAMETERS ON THE CHARACTERISTICS OF EFFERVESCENT ATOMIZATION
Miroslav Jicha, Jan Jedelsky, Jan Otahal and Jaroslav Slama
 
 Atomizer Design

 
K up

Kaario, Ossi
NON-EVAPORATING LIQUID SPRAY SIMULATIONS WITH THE ETAB AND WAVE DROPLET BREAKUP MODELS
Ossi Kaario, Martti Larmi and Franz X. Tanner
 
 Engine Sprays

Kaesemann, Ruth
OPTIMISATION OF THE WET FLUE GAS CLEANING PROCESS THROUGH MODELLING THE USE OF DROPLET INTERACTIONS IN OVERLAPPING SPRAYS
Ruth Kaesemann, Joachim Neumann and Hans Fahlenkamp
 
 Droplet Collisions

Kato, Masaaki
ANALYSIS OF SWIRL INJECTION CHARACTERISTICS
Masaaki Kato, Kenji Date, Kazutoshi Koie and Takio Oya
 
 Spray Modelling

Katoshevski, D.
DRAG FORCE ON A HEATED SPHERE
D. Katoshevski, G. Ziskind, E. Mograbi and E. Bar-Ziv
 
 Posters

Kepplinger, Werner
INFLUENCE OF THE GEOMETRICAL ARRANGEMENT OF THE PHASE CONTACT ON OPERATING CONDITIONS OF INTERNAL MIXING ATOMIZERS
Martin Dopler, Christian Weiss and Werner Kepplinger
 
 Posters

Khaidarov, S.
SPRAY INTERACTION AND DROPLET COALESCENCE IN TURBULENT AIR-FLOW. AN EXPERIMENTAL STUDY WITH APPLICATION TO GAS TURBINE HIGH FOGGING.
S. Savic, G. Mitsis, C. Härtel, S. Khaidarov and P. Pfeiffer
 
 Gas Turbines

Khalifa, E.
SIMULATION OF THE SPRAY COATING PROCESS USING A PNEUMATIC ATOMIZER
Q. Ye, Joachim Domnick and E. Khalifa
 
 Spray Deposition

Kholmer, V.
GAS-DISSOLVED HIGH QUALITY GASOLINE SPRAY BY USING CO2-DISSOLVED MIXTURE
Alexander Rashkovan, B. Rivin, V. Kholmer and E. Sher
 
 Engine Sprays

Kippax, Paul
PARTICLE SIZE CHARACTERISATION OF AGRICULTURAL SPRAYS USING LASER DIFFRACTION
Paul Kippax, Steve Parkin and Clive Tuck
 
 Agricultural

Kireitseu, M.V.
RHEOLOGICAL MODEL OF COMPOSITE SLIDING BEARING COMPRISING HARD COATING ON SOFT POLYMER INTERLAYER
M.V. Kireitseu, S.G. Yerakhavets, Ion Nemerenco, M. Istomin,
M.A. Belotserkovski and A. Fedaravichus
 
 Spray Deposition

Kirpalani, Deepak
PERFORMANCE DIAGNOSTICS FOR NOZZLES FED WITH MULTIPHASE FLOW
Deepak Kirpalani and T.W. McCracken
 
 Atomizer Design

Koch, R.
A MULTI-COMPONENT DROPLET EVAPORATION MODEL FOR REAL AVIATION FUELS AT ELEVATED PRESSURES
Matthias Burger, Roland Schmehl, P. Prommersberger, O. Schaefer,
R. Koch and S. Wittig
 
 Gas Turbines

Koie, Kazutoshi
ANALYSIS OF SWIRL INJECTION CHARACTERISTICS
Masaaki Kato, Kenji Date, Kazutoshi Koie and Takio Oya
 
 Spray Modelling

Kolaitis, D.
DIESEL SPRAY EVAPORATION MODELLING IN A "COOL FLAME" ENVIRONMENT: A NOVEL APPROACH
D. Kolaitis and M. Founti
 
 Gas Turbines

Komaki, Minoru
APPLICATION OF SHADOW DOPPLER VELOCIMETRY TO ARBITRARY-SHAPED DROPLET MEASUREMENT IN WATER SPRAY
Kazuaki Matsuura, Minoru Komaki and Koji Ueyama
 
 Spray Diagnostics

Kumamaru, H.
MOLECULAR DYNAMIC SIMULATION OF AN ELECTROHYDRODYNAMIC LIQUID JET
Tomoya Funakawa, M. Yamaguchi, H. Kumamaru, W. Balachandran and
Z. Huneiti
 
 Electrosprays

 
L up

Laidler, K.
NOVEL DEVELOPMENTS IN ACTUATOR DESIGNS FOR FLASHING HOUSEHOLD AEROSOLS
R. A. Sharief, A. J. Yule and K. Laidler
 
 Atomizer Design

Laín, Santiago
INFLUENCE OF PARTICLE-PARTICLE COLLISIONS IN A ROUND JET LADEN WITH SOLIDS
Santiago Laín, J.A. García, L.A. Aísa and Martin Sommerfeld
 
 Droplet Collisions

Langella, G.
ANALYSIS OF DROPLETS FALLING ON HOT VERTICAL SURFACE
Amedeo Amoresano, G. Langella and C. Noviello
 
 Spray Impact on Walls

Larmi, Martti
NON-EVAPORATING LIQUID SPRAY SIMULATIONS WITH THE ETAB AND WAVE DROPLET BREAKUP MODELS
Ossi Kaario, Martti Larmi and Franz X. Tanner
 
 Engine Sprays

Laryea, G. N.
SPRAY CHARACTERISTICS OF CHARGE INJECTED ELECTROSTATIC PRESSURE-SWIRL NOZZLE
G. N. Laryea and Soo-Young No
 
 Electrosprays

Lavergne, G.
EXPERIMENTAL AND NUMERICAL STUDY OF THIN WALL LIQUID FILM SPREADING ON A HEATING SURFACE.
Stephane Giroud-Garapon, G. Heid, G. Lavergne and O. Simonin
 
 Spray Impact on Walls
A RECTILINEAR DROPLET STREAM STUDY: DYNAMICAL AND THERMAL BEHAVIOR
A. Atthasit, G. Castanet, Y. Biscos, F. Lemoine and
G. Lavergne
 
 Posters

Lawes, Malcolm
ENHANCED BURNING RATES DUE TO DROPLET INDUCED FLAME INSTABILITIES
Malcolm Lawes, Y. Lee and Numa Marquez
 
 Spray Combustion

Lecuona, A.
SENSITIVITY TO OPTICAL NOISE OF THE MEASUREMENTS OF CONCENTRATION AND VOLUME FLUX WITH A PHASE DOPPLER PARTICLE ANALYZER IN DILUTE AND DENSE SPRAYS
E. Palacios, A. Lecuona, M. de Vega and P. Rodríguez
 
 Spray Diagnostics

Ledoux, Michel
EXTERNAL AND INTERNAL BEHAVIOR OF THE NEAR FIELD DIESEL JET AT HIGH INJECTION PRESSURE : DUAL SOURCE VISUALIZATION AND A MULTIPLE ANGLES TOMOGRAPHIC EXPERIMENTS.
Jérôme Yon, Jean-Bernard Blaisot and Michel Ledoux
 
 Engine Sprays

Lee, Y.
ENHANCED BURNING RATES DUE TO DROPLET INDUCED FLAME INSTABILITIES
Malcolm Lawes, Y. Lee and Numa Marquez
 
 Spray Combustion

Lemini, Eduardo
DEVELOPMENT OF A SPRAY WALL IMPACTION MODEL WITHOUT DISCRETISATION INTO DROPLET SIZE CLASSES
Eduardo Lemini and Paul Watkins
 
 Spray Impact on Walls

Lemoine, F.
A RECTILINEAR DROPLET STREAM STUDY: DYNAMICAL AND THERMAL BEHAVIOR
A. Atthasit, G. Castanet, Y. Biscos, F. Lemoine and
G. Lavergne
 
 Posters

Lienemann, H.
TIMESCALE CONSIDERATIONS FOR INTERNAL COMBUSTION ENGINE SPRAYS
H. Lienemann and John S. Shrimpton
 
 Engine Sprays

Lincheta, E.
PERFORMANCE OF INTERNAL MIXING AIR-ASSISTED NOZZLES FOR HEAVY FUEL OIL BURNERS
E. Lincheta, Jorge Barroso, J. Suárez, Félix Barreras and
Antonio Lozano
 
 Atomizer Design

Linnepe, Tanja
SPRAY DRYING OF SUSPENSIONS USING FLASH-EVAPORATION
Karsten Monse, Tanja Linnepe, Sascha Groom and Peter Walzel
 
 Posters
PRODUCING MONOSIZED DROPLETS BY VIBRATIONAL EXCITATED PNEUMATIC NOZZLES
Tanja Linnepe, M. Heitkamp and Peter Walzel
 
 Posters

Lohner, H.
MELT ATOMIZATION BY HEATED GASES
H. Lohner, U. Fritsching and K. Bauckhage
 
 Metal Manufacturing

López-Herrera, J.
RECENT ADVANCES IN ELECTROATOMIZATION
Antonio Barrero, J. López-Herrera and I.G. Loscertales
 
 Invited Lectures

Loscertales, I.G.
RECENT ADVANCES IN ELECTROATOMIZATION
Antonio Barrero, J. López-Herrera and I.G. Loscertales
 
 Invited Lectures

Lozano, Antonio
PERFORMANCE OF INTERNAL MIXING AIR-ASSISTED NOZZLES FOR HEAVY FUEL OIL BURNERS
E. Lincheta, Jorge Barroso, J. Suárez, Félix Barreras and
Antonio Lozano
 
 Atomizer Design
THE INFLUENCE OF AIR CO-FLOW CHARACTERISTICS ON THE OSCILLATION OF A LIQUID SHEET
Christian Siegler, Antonio Lozano and Félix Barreras
 
 Sheet Instabilities

Luque Escamilla, Pedro Luis
CHARACTERISATION OF HIGH PRESSURE DIESEL FUEL SPRAYS BY ENTROPIC EDGE DETECTION
Pedro Luis Luque Escamilla, Jérôme Seneschal,
Juan Francisco Gómez Lopera, Christophe Ducottet,
José Martínez Aroza and Jean-Claude Champoussin
 
 Spray Diagnostics

 
M up

Maas, U.
NUMERICAL INVESTIGATION OF DROPLET HEATING, VAPORIZATION, AND IGNITION OF METHANOL AND LOX DROPLETS IN A CONVECTIVE FLOW FIELD
Y. Aouina, E. Gutheil, U. Maas, U. Riedel and J. Warnatz
 
 Cryogenic

Maatje, U.
INVESTIGATION OF UNSTEADY EFFECTS IN PRESSURE SWIRL ATOMIZERS
Ernst von Lavante, U. Maatje and F. O. Albina
 
 Spray Modelling

Madsen, Jesper
A COMPUTATIONAL AND EXPERIMENTAL STUDY OF THE INTERNAL FLOW IN A SCALED PRESSURE-SWIRL ATOMIZER
Kim Granly Hansen, Jesper Madsen, Chinh Minh Trinh,
Claus H. Ibsen, Tron Solberg and Bjorn H. Hjertager
 
 Atomizer Design

Malmgren, A.
ISOTHERMAL COMPRESSION BY DENSE WATER SPRAYS IN A RECIPROCATING PISTON COMPRESSOR
P L Stephenson, A. Malmgren, M Coney, R. A. Huxley and
R. A. Richards
 
 Engine Sprays

Manceau, J.F.
DROP SPRAYING USING A VIBRATING SURFACE UNDER INFLUENCE OF AN ELECTRIC FIELD
S. Alzuaga, J.F. Manceau and F. Bastien
 
 Posters

Marengo, M.
SECONDARY DROPLET ATOMISATION FROM SINGLE DROP IMPACTS ON HEATED SURFACES
G.E. Cossali, M. Marengo, M. Santini and J. Watanabe
 
 Spray Impact on Walls
COMPARISON OF FRONT-TRACKING AND FRONT-CAPTURING COMPUTATIONS WITH EXPERIMENTAL DATA OF DROPLET IMPACT ONTO SHALLOW LIQUID POOLS
Yannis Hardalupas, H. Pergamalis, A.M.K.P. Taylor, G.E. Cossali
and M. Marengo
 
 Spray Impact on Walls

Marquez, Numa
ENHANCED BURNING RATES DUE TO DROPLET INDUCED FLAME INSTABILITIES
Malcolm Lawes, Y. Lee and Numa Marquez
 
 Spray Combustion

Martínez-Bazán, Carlos
THE EFFECT OF THE DIAMETER RATIO ON THE ABSOLUTE AND CONVECTIVE INSTABILITY OF FREE, COFLOWING JETS
A. Sevilla, Carlos Martínez-Bazán and J.M. Gordillo
 
 Fundamentals of Break Up
MEASUREMENTS OF THE TURBULENT BREAK-UP OF BUBBLES USING HIGH SPEED VIDEO IMAGES
Javier Rodríguez, Carlos Martínez-Bazán and J.L. Montañes
 
 Spray Diagnostics

Martínez Aroza, José
CHARACTERISATION OF HIGH PRESSURE DIESEL FUEL SPRAYS BY ENTROPIC EDGE DETECTION
Pedro Luis Luque Escamilla, Jérôme Seneschal,
Juan Francisco Gómez Lopera, Christophe Ducottet,
José Martínez Aroza and Jean-Claude Champoussin
 
 Spray Diagnostics

Matsuura, Kazuaki
APPLICATION OF SHADOW DOPPLER VELOCIMETRY TO ARBITRARY-SHAPED DROPLET MEASUREMENT IN WATER SPRAY
Kazuaki Matsuura, Minoru Komaki and Koji Ueyama
 
 Spray Diagnostics

Mayer, W.
INJECTION CHARACTERISTICS ON THE SURFACE OF A LIQUID JET IN A WIND TUNNEL
R. Branam, M. Hammou, A. Volpp and W. Mayer
 
 Posters

McCracken, T.W.
PERFORMANCE DIAGNOSTICS FOR NOZZLES FED WITH MULTIPHASE FLOW
Deepak Kirpalani and T.W. McCracken
 
 Atomizer Design

Merker, G.P.
A NEW MODEL FOR CAVITATION INDUCED PRIMARY BREAK-UP OF DIESEL SPRAYS
Carsten Baumgarten, J. Stegemann and G.P. Merker
 
 Engine Sprays
INFLUENCE OF THROTTLE EFFECTS AT THE NEEDLE SEAT ON THE SPRAY CHARACTERISTICS OF A MULTIHOLE INJECTION NOZZLE
J. Stegemann, J. Seebode, J. Baltes, Carsten Baumgarten and
G.P. Merker
 
 Engine Sprays

Milton, Brian
MIXING OF CO-AXIAL NATURAL GAS/LIQUID DIESEL FUEL SPRAYS
T. R. White and Brian Milton
 
 Posters

Miranda, R.
IMAGING OF CAVITATION, HOLLOW JETS AND JET BRANCHING AT LOW LIFT IN A REAL SIZE VCO NOZZLE
R. Miranda, Humberto Chaves and F. Obermeier
 
 Engine Sprays

Mitsis, G.
SPRAY INTERACTION AND DROPLET COALESCENCE IN TURBULENT AIR-FLOW. AN EXPERIMENTAL STUDY WITH APPLICATION TO GAS TURBINE HIGH FOGGING.
S. Savic, G. Mitsis, C. Härtel, S. Khaidarov and P. Pfeiffer
 
 Gas Turbines

Mograbi, E.
DRAG FORCE ON A HEATED SPHERE
D. Katoshevski, G. Ziskind, E. Mograbi and E. Bar-Ziv
 
 Posters

Moita, A. S.
THE DYNAMIC BEHAVIOUR OF SINGLE DROPLETS IMPACTING ONTO A FLAT SURFACE
A. S. Moita and António Moreira
 
 Spray Impact on Walls

Monien, Burkhard
MODELLING AND SIMULATION OF THE DISINTEGRATION PROCESS IN AN ULTRASONIC STANDING WAVE ATOMIZER
Oliver Reipschläger, Dieter Bothe, Hans-Joachim Warnecke,
Burkhard Monien, Jan Prüss and Bernhard Weigand
 
 Ultrasonic

Monse, Karsten
SPRAY DRYING OF SUSPENSIONS USING FLASH-EVAPORATION
Karsten Monse, Tanja Linnepe, Sascha Groom and Peter Walzel
 
 Posters

Montañes, J.L.
MEASUREMENTS OF THE TURBULENT BREAK-UP OF BUBBLES USING HIGH SPEED VIDEO IMAGES
Javier Rodríguez, Carlos Martínez-Bazán and J.L. Montañes
 
 Spray Diagnostics

Moreira, António
SPRAY IMPINGEMENT ON A FLAT PLATE UNDER CROSS FLOW CONDITIONS
M. R. Panão and António Moreira
 
 Spray Impact on Walls
THE DYNAMIC BEHAVIOUR OF SINGLE DROPLETS IMPACTING ONTO A FLAT SURFACE
A. S. Moita and António Moreira
 
 Spray Impact on Walls

Motzigemba, Michael
THE EFFECT OF NON-NEWTONIAN FLOW BEHAVIOUR ON BINARY DROPLET COLLISIONS: VOF-SIMULATION AND EXPERIMENTAL ANALYSIS
Michael Motzigemba, Norbert Roth, Dieter Bothe,
Hans-Joachim Warnecke, Jan Prüss, K. Wielage and Bernhard Weigand
 
 Droplet Collisions

 
N up

Nakic, R.
INFLUENCE OF TURBULENCE ON THE STABILITY OF LIQUID SHEETS
K. Heukelbach, S. Jakirlic, R. Nakic and Cam Tropea
 
 Sheet Instabilities

Nazarov, A.D.
DEPOSITION OF LIQUID FILMS FROM NEAR-WALL SPRAY JETS IN A CYLINDRICAL CHANNEL
Victor Terekhov, K.A. Sharov, A.F. Serov and A.D. Nazarov
 
 Spray Deposition

Nemerenco, Ion
RHEOLOGICAL MODEL OF COMPOSITE SLIDING BEARING COMPRISING HARD COATING ON SOFT POLYMER INTERLAYER
M.V. Kireitseu, S.G. Yerakhavets, Ion Nemerenco, M. Istomin,
M.A. Belotserkovski and A. Fedaravichus
 
 Spray Deposition

Neumann, Joachim
OPTIMISATION OF THE WET FLUE GAS CLEANING PROCESS THROUGH MODELLING THE USE OF DROPLET INTERACTIONS IN OVERLAPPING SPRAYS
Ruth Kaesemann, Joachim Neumann and Hans Fahlenkamp
 
 Droplet Collisions

No, Soo-Young
SPRAY CHARACTERISTICS OF CHARGE INJECTED ELECTROSTATIC PRESSURE-SWIRL NOZZLE
G. N. Laryea and Soo-Young No
 
 Electrosprays

Noviello, C.
ANALYSIS OF DROPLETS FALLING ON HOT VERTICAL SURFACE
Amedeo Amoresano, G. Langella and C. Noviello
 
 Spray Impact on Walls

 
O up

Obermeier, F.
IMAGING OF CAVITATION, HOLLOW JETS AND JET BRANCHING AT LOW LIFT IN A REAL SIZE VCO NOZZLE
R. Miranda, Humberto Chaves and F. Obermeier
 
 Engine Sprays
BUBBLE PRODUCTION OCCURRING ON THE PERIODIC IMPACT OF VISCOUS DROPS
P. L. Torres Sanchez, Humberto Chaves and F. Obermeier
 
 Spray Impact on Walls

Oda, Tetsuya
SPATIAL VELOCITY MEASUREMENT OF INTERNAL CAVITATING FLOW AND CHARACTERISTICS OF LIQUID JET ATOMIZATION OF 2-D HOLE NOZZLE
Tetsuya Oda and Yhu Yasuda
 
 Engine Sprays

Oschwald, M.
INFLUENCE OF J AND WE NUMBER ON GH2/LOX IGNITION PROCESS
V. Schmidt, O. Gurliat, M. Oschwald and Oskar J. Haidn
 
 Cryogenic

Otahal, Jan
INFLUENCE OF SOME GEOMETRICAL PARAMETERS ON THE CHARACTERISTICS OF EFFERVESCENT ATOMIZATION
Miroslav Jicha, Jan Jedelsky, Jan Otahal and Jaroslav Slama
 
 Atomizer Design

Oya, Takio
ANALYSIS OF SWIRL INJECTION CHARACTERISTICS
Masaaki Kato, Kenji Date, Kazutoshi Koie and Takio Oya
 
 Spray Modelling

 
P up

Palacios, E.
SENSITIVITY TO OPTICAL NOISE OF THE MEASUREMENTS OF CONCENTRATION AND VOLUME FLUX WITH A PHASE DOPPLER PARTICLE ANALYZER IN DILUTE AND DENSE SPRAYS
E. Palacios, A. Lecuona, M. de Vega and P. Rodríguez
 
 Spray Diagnostics

Panão, M. R.
SPRAY IMPINGEMENT ON A FLAT PLATE UNDER CROSS FLOW CONDITIONS
M. R. Panão and António Moreira
 
 Spray Impact on Walls

Pan, Y.
NUMERICAL SIMULATION OF PINCH-OFF JET PROCESS BY THE LEVEL SET METHOD
Y. Pan and K. Suga
 
 Spray Modelling

Parkin, Steve
PARTICLE SIZE CHARACTERISATION OF AGRICULTURAL SPRAYS USING LASER DIFFRACTION
Paul Kippax, Steve Parkin and Clive Tuck
 
 Agricultural

Pergamalis, H.
COMPARISON OF FRONT-TRACKING AND FRONT-CAPTURING COMPUTATIONS WITH EXPERIMENTAL DATA OF DROPLET IMPACT ONTO SHALLOW LIQUID POOLS
Yannis Hardalupas, H. Pergamalis, A.M.K.P. Taylor, G.E. Cossali
and M. Marengo
 
 Spray Impact on Walls

Persson, Fredrik
A SURVEY OF MODEL FUEL MIXTURES SUITABLE FOR EXCIPLEX-SPECTROSCOPY FOR LIQUID/VAPOR VISUALIZATION
Fredrik Persson, Michael Försth and Arne Rosén
 
 Spray Diagnostics

Pfeiffer, P.
SPRAY INTERACTION AND DROPLET COALESCENCE IN TURBULENT AIR-FLOW. AN EXPERIMENTAL STUDY WITH APPLICATION TO GAS TURBINE HIGH FOGGING.
S. Savic, G. Mitsis, C. Härtel, S. Khaidarov and P. Pfeiffer
 
 Gas Turbines

Pichard, Cécile
STUDIES ON THE EFFECT OF AIR TEMPERATURE ON LEAN PREMIXED PREVAPORISED TURBULENT SPRAY FLAMES
Cécile Pichard, C. Chauveau and I. Gökalp
 
 Spray Combustion

Platzer, Elke
MODELLING OF TURBULENT ATOMIZATION WITH A COMBINED EULER/LAGRANGE EULER/EULER APPROACH: STARTING WITH A TWO-FLUID MODEL IN THE DENSE SPRAY REGION
Elke Platzer and Martin Sommerfeld
 
 Spray Modelling

Poredos, A.
PRIMARY BREAK-UP MODEL FOR DIESEL JETS BASED ON LOCALLY RESOLVED FLOW FIELD IN THE INJECTION HOLE
E. v. Berg, A. Alajbegovic, D. Greif, A. Poredos,
R. Tatschl, E. Winklhofer and L.C. Ganippa
 
 Spray Modelling

Prebeg, Z.
SPRAY FORMATION THROUGH LIQUID SHEET BREAK-UP CONTROLLED BY VIBRATIONAL EXCITATION
Günter Brenn, Z. Prebeg and A.L. Yarin
 
 Sheet Instabilities

Prommersberger, P.
A MULTI-COMPONENT DROPLET EVAPORATION MODEL FOR REAL AVIATION FUELS AT ELEVATED PRESSURES
Matthias Burger, Roland Schmehl, P. Prommersberger, O. Schaefer,
R. Koch and S. Wittig
 
 Gas Turbines

Prüss, Jan
MODELLING AND SIMULATION OF THE DISINTEGRATION PROCESS IN AN ULTRASONIC STANDING WAVE ATOMIZER
Oliver Reipschläger, Dieter Bothe, Hans-Joachim Warnecke,
Burkhard Monien, Jan Prüss and Bernhard Weigand
 
 Ultrasonic
THE EFFECT OF NON-NEWTONIAN FLOW BEHAVIOUR ON BINARY DROPLET COLLISIONS: VOF-SIMULATION AND EXPERIMENTAL ANALYSIS
Michael Motzigemba, Norbert Roth, Dieter Bothe,
Hans-Joachim Warnecke, Jan Prüss, K. Wielage and Bernhard Weigand
 
 Droplet Collisions

 
R up

Ragucci, Raffaele
IDENTIFICATION OF CROSS-FLOW LIQUID-JET STRUCTURES BY MEANS OF STATISTICAL IMAGE EVALUATION
Raffaele Ragucci and A. Cavaliere
 
 Spray Diagnostics
ATOMIZATION AND COMBUSTION OF A SIMPLE ELECTROSPRAY
A. Cavaliere, Raffaele Ragucci, F. Beretta and C. Allouis
 
 Spray Combustion

Rashkovan, Alexander
GAS-DISSOLVED HIGH QUALITY GASOLINE SPRAY BY USING CO2-DISSOLVED MIXTURE
Alexander Rashkovan, B. Rivin, V. Kholmer and E. Sher
 
 Engine Sprays

Reipschläger, Oliver
MODELLING AND SIMULATION OF THE DISINTEGRATION PROCESS IN AN ULTRASONIC STANDING WAVE ATOMIZER
Oliver Reipschläger, Dieter Bothe, Hans-Joachim Warnecke,
Burkhard Monien, Jan Prüss and Bernhard Weigand
 
 Ultrasonic

Richards, R. A.
ISOTHERMAL COMPRESSION BY DENSE WATER SPRAYS IN A RECIPROCATING PISTON COMPRESSOR
P L Stephenson, A. Malmgren, M Coney, R. A. Huxley and
R. A. Richards
 
 Engine Sprays

Riedel, U.
NUMERICAL INVESTIGATION OF DROPLET HEATING, VAPORIZATION, AND IGNITION OF METHANOL AND LOX DROPLETS IN A CONVECTIVE FLOW FIELD
Y. Aouina, E. Gutheil, U. Maas, U. Riedel and J. Warnatz
 
 Cryogenic

Rivin, B.
GAS-DISSOLVED HIGH QUALITY GASOLINE SPRAY BY USING CO2-DISSOLVED MIXTURE
Alexander Rashkovan, B. Rivin, V. Kholmer and E. Sher
 
 Engine Sprays

Rodríguez, Javier
MEASUREMENTS OF THE TURBULENT BREAK-UP OF BUBBLES USING HIGH SPEED VIDEO IMAGES
Javier Rodríguez, Carlos Martínez-Bazán and J.L. Montañes
 
 Spray Diagnostics

Rodríguez, P.
SENSITIVITY TO OPTICAL NOISE OF THE MEASUREMENTS OF CONCENTRATION AND VOLUME FLUX WITH A PHASE DOPPLER PARTICLE ANALYZER IN DILUTE AND DENSE SPRAYS
E. Palacios, A. Lecuona, M. de Vega and P. Rodríguez
 
 Spray Diagnostics

Roetmann, Karsten
PIV-INVESTIGATIONS OF INTERNAL SLIT NOZZLE FLOWS AND THEIR INFLUENCE ON LIQUID SHEET BREAKUP
Jochen Scholz, Karsten Roetmann and Volker Beushausen
 
 Spray Diagnostics

Roger, Francis
LIQUID ATOMIZATION BY ANNULAR SWIRLING GAS
Arnaud Dunand, Remy Sorin, Jean Louis Carreau and
Francis Roger
 
 Fundamentals of Break Up

Roisman, Ilia
FLOW ON A WALL SURFACE DUE TO SPRAY IMPACT
Ilia Roisman and Cam Tropea
 
 Spray Impact on Walls

Rosén, Arne
A SURVEY OF MODEL FUEL MIXTURES SUITABLE FOR EXCIPLEX-SPECTROSCOPY FOR LIQUID/VAPOR VISUALIZATION
Fredrik Persson, Michael Försth and Arne Rosén
 
 Spray Diagnostics

Roth, Norbert
THE EFFECT OF NON-NEWTONIAN FLOW BEHAVIOUR ON BINARY DROPLET COLLISIONS: VOF-SIMULATION AND EXPERIMENTAL ANALYSIS
Michael Motzigemba, Norbert Roth, Dieter Bothe,
Hans-Joachim Warnecke, Jan Prüss, K. Wielage and Bernhard Weigand
 
 Droplet Collisions

Rotondi, Rossella
MODELING AUTOIGNITION IN MODERN D.I. DIESEL ENGINE
Rossella Rotondi
 
 Engine Sprays

 
S up

Santini, M.
SECONDARY DROPLET ATOMISATION FROM SINGLE DROP IMPACTS ON HEATED SURFACES
G.E. Cossali, M. Marengo, M. Santini and J. Watanabe
 
 Spray Impact on Walls

Santolaya, J.L.
DYNAMIC CHARACTERIZATION OF A PRESSURE SWIRL HOLLOW CONE SPRAY
J.L. Santolaya, L.A. Aísa, J.A. García, I. García Palacín
and E. Calvo
 
 Atomizer Design

Savic, S.
SPRAY INTERACTION AND DROPLET COALESCENCE IN TURBULENT AIR-FLOW. AN EXPERIMENTAL STUDY WITH APPLICATION TO GAS TURBINE HIGH FOGGING.
S. Savic, G. Mitsis, C. Härtel, S. Khaidarov and P. Pfeiffer
 
 Gas Turbines

Schaefer, O.
A MULTI-COMPONENT DROPLET EVAPORATION MODEL FOR REAL AVIATION FUELS AT ELEVATED PRESSURES
Matthias Burger, Roland Schmehl, P. Prommersberger, O. Schaefer,
R. Koch and S. Wittig
 
 Gas Turbines

Schmehl, Roland
A MULTI-COMPONENT DROPLET EVAPORATION MODEL FOR REAL AVIATION FUELS AT ELEVATED PRESSURES
Matthias Burger, Roland Schmehl, P. Prommersberger, O. Schaefer,
R. Koch and S. Wittig
 
 Gas Turbines
ADVANCED MODELING OF DROPLET DEFORMATION AND BREAKUP FOR CFD ANALYSIS OF MIXTURE PREPARATION
Roland Schmehl
 
 Spray Modelling

Schmidt, V.
INFLUENCE OF J AND WE NUMBER ON GH2/LOX IGNITION PROCESS
V. Schmidt, O. Gurliat, M. Oschwald and Oskar J. Haidn
 
 Cryogenic

Scholz, Jochen
PIV-INVESTIGATIONS OF INTERNAL SLIT NOZZLE FLOWS AND THEIR INFLUENCE ON LIQUID SHEET BREAKUP
Jochen Scholz, Karsten Roetmann and Volker Beushausen
 
 Spray Diagnostics

Schürmann, Stefan
DROPLET SIZING AND CHARACTERIZATION OF WATER MIST FIRE PROTECTION SPRAY NOZZLES
Stefan Schürmann
 
 Atomizer Design

Seebode, J.
INFLUENCE OF THROTTLE EFFECTS AT THE NEEDLE SEAT ON THE SPRAY CHARACTERISTICS OF A MULTIHOLE INJECTION NOZZLE
J. Stegemann, J. Seebode, J. Baltes, Carsten Baumgarten and
G.P. Merker
 
 Engine Sprays

Seibel, Christian
VAPORIZATION OF MULTICOMPONENT FUEL DROPLETS NUMERICAL AND EXPERIMENTAL EVALUATION
Kai Gartung, Stefan Arndt and Christian Seibel
 
 Engine Sprays

Seneschal, Jérôme
CHARACTERISATION OF HIGH PRESSURE DIESEL FUEL SPRAYS BY ENTROPIC EDGE DETECTION
Pedro Luis Luque Escamilla, Jérôme Seneschal,
Juan Francisco Gómez Lopera, Christophe Ducottet,
José Martínez Aroza and Jean-Claude Champoussin
 
 Spray Diagnostics

Serov, A.F.
DEPOSITION OF LIQUID FILMS FROM NEAR-WALL SPRAY JETS IN A CYLINDRICAL CHANNEL
Victor Terekhov, K.A. Sharov, A.F. Serov and A.D. Nazarov
 
 Spray Deposition

Sevilla, A.
THE EFFECT OF THE DIAMETER RATIO ON THE ABSOLUTE AND CONVECTIVE INSTABILITY OF FREE, COFLOWING JETS
A. Sevilla, Carlos Martínez-Bazán and J.M. Gordillo
 
 Fundamentals of Break Up

Sharief, R. A.
NOVEL DEVELOPMENTS IN ACTUATOR DESIGNS FOR FLASHING HOUSEHOLD AEROSOLS
R. A. Sharief, A. J. Yule and K. Laidler
 
 Atomizer Design

Sharov, K.A.
DEPOSITION OF LIQUID FILMS FROM NEAR-WALL SPRAY JETS IN A CYLINDRICAL CHANNEL
Victor Terekhov, K.A. Sharov, A.F. Serov and A.D. Nazarov
 
 Spray Deposition

Sher, E.
GAS-DISSOLVED HIGH QUALITY GASOLINE SPRAY BY USING CO2-DISSOLVED MIXTURE
Alexander Rashkovan, B. Rivin, V. Kholmer and E. Sher
 
 Engine Sprays
SPRAY FORMATION BY BI-COMPONENT LIQUID FLASHING: A THEORETICAL APPROACH
T. Bar-Kohany and E. Sher
 
 Spray Modelling

Shimizu, M.
ENHANCEMENT OF ATOMIZATION OF HIGH VISCOUS LIQUID JET BY PRESSURE ATOMIZED NOZZLE
Nobushige Tamaki and M. Shimizu
 
 Atomizer Design

Shortall, B.
DEPOSITION OF PARTICLES IN THE UPPER RESPIRATORY TRACT
Tevfik Gemci, B. Shortall, T.E. Corcoran and N. Chigier
 
 Medical

Shrimpton, John S.
TIMESCALE CONSIDERATIONS FOR INTERNAL COMBUSTION ENGINE SPRAYS
H. Lienemann and John S. Shrimpton
 
 Engine Sprays

Sick, Volker
VALIDATION OF AN ENHANCED LIQUID SHEET ATOMISATION MODEL AGAINST QUANTITATIVE LASER DIAGNOSTIC MEASUREMENTS
Christos Chryssakis, Katherine D. Driscoll, Volker Sick and
Dennis N. Assanis
 
 Engine Sprays

Siegler, Christian
THE INFLUENCE OF AIR CO-FLOW CHARACTERISTICS ON THE OSCILLATION OF A LIQUID SHEET
Christian Siegler, Antonio Lozano and Félix Barreras
 
 Sheet Instabilities

Silvani, X.
AN EULERIAN MODEL TO IMPROVE THE PRIMARY BREAKUP MODELING OF ATOMIZING JET.
G. Blokkeel, X. Silvani, François-Xavier Demoulin and R. Borghi
 
 Spray Modelling

Simonin, O.
EXPERIMENTAL AND NUMERICAL STUDY OF THIN WALL LIQUID FILM SPREADING ON A HEATING SURFACE.
Stephane Giroud-Garapon, G. Heid, G. Lavergne and O. Simonin
 
 Spray Impact on Walls

Sindayihebura, Daniel
ULTRASONIC ATOMIZATION SPRAY ANALYSIS WITH A THREE-PARAMETER GENERALIZED GAMMA FUNCTION.
Christophe Dumouchel, Daniel Sindayihebura and L. Bolle
 
 Ultrasonic

Slama, Jaroslav
INFLUENCE OF SOME GEOMETRICAL PARAMETERS ON THE CHARACTERISTICS OF EFFERVESCENT ATOMIZATION
Miroslav Jicha, Jan Jedelsky, Jan Otahal and Jaroslav Slama
 
 Atomizer Design

Solberg, Tron
A COMPUTATIONAL AND EXPERIMENTAL STUDY OF THE INTERNAL FLOW IN A SCALED PRESSURE-SWIRL ATOMIZER
Kim Granly Hansen, Jesper Madsen, Chinh Minh Trinh,
Claus H. Ibsen, Tron Solberg and Bjorn H. Hjertager
 
 Atomizer Design

Sommerfeld, Martin
MODELLING OF TURBULENT ATOMIZATION WITH A COMBINED EULER/LAGRANGE EULER/EULER APPROACH: STARTING WITH A TWO-FLUID MODEL IN THE DENSE SPRAY REGION
Elke Platzer and Martin Sommerfeld
 
 Spray Modelling
A STOCHASTIC DROPLET COLLISION MODEL WITH CONSIDERATION OF IMPACT EFFICIENCY
S. Blei, C. A. Ho and Martin Sommerfeld
 
 Droplet Collisions
INFLUENCE OF PARTICLE-PARTICLE COLLISIONS IN A ROUND JET LADEN WITH SOLIDS
Santiago Laín, J.A. García, L.A. Aísa and Martin Sommerfeld
 
 Droplet Collisions

Sorin, Remy
LIQUID ATOMIZATION BY ANNULAR SWIRLING GAS
Arnaud Dunand, Remy Sorin, Jean Louis Carreau and
Francis Roger
 
 Fundamentals of Break Up

Stegemann, J.
A NEW MODEL FOR CAVITATION INDUCED PRIMARY BREAK-UP OF DIESEL SPRAYS
Carsten Baumgarten, J. Stegemann and G.P. Merker
 
 Engine Sprays
INFLUENCE OF THROTTLE EFFECTS AT THE NEEDLE SEAT ON THE SPRAY CHARACTERISTICS OF A MULTIHOLE INJECTION NOZZLE
J. Stegemann, J. Seebode, J. Baltes, Carsten Baumgarten and
G.P. Merker
 
 Engine Sprays

Stephenson, P L
ISOTHERMAL COMPRESSION BY DENSE WATER SPRAYS IN A RECIPROCATING PISTON COMPRESSOR
P L Stephenson, A. Malmgren, M Coney, R. A. Huxley and
R. A. Richards
 
 Engine Sprays

Strickland, P.
SPRAY CHARACTERIZATION FOR FLUIDIZED BED GRANULATION PROCESSES
Tevfik Gemci, N. Chigier, P.P. Godbole and P. Strickland
 
 Medical

Suárez, J.
PERFORMANCE OF INTERNAL MIXING AIR-ASSISTED NOZZLES FOR HEAVY FUEL OIL BURNERS
E. Lincheta, Jorge Barroso, J. Suárez, Félix Barreras and
Antonio Lozano
 
 Atomizer Design

Suga, K.
NUMERICAL SIMULATION OF PINCH-OFF JET PROCESS BY THE LEVEL SET METHOD
Y. Pan and K. Suga
 
 Spray Modelling

 
T up

Tamaki, Nobushige
ENHANCEMENT OF ATOMIZATION OF HIGH VISCOUS LIQUID JET BY PRESSURE ATOMIZED NOZZLE
Nobushige Tamaki and M. Shimizu
 
 Atomizer Design

Tanner, Franz X.
NON-EVAPORATING LIQUID SPRAY SIMULATIONS WITH THE ETAB AND WAVE DROPLET BREAKUP MODELS
Ossi Kaario, Martti Larmi and Franz X. Tanner
 
 Engine Sprays

Tapia-Ramirez, Zoili
INTERNAL FLOW IN A Y-JET ATOMISER ---NUMERICAL MODELLING---
Zoili Tapia-Ramirez and A. Chávez
 
 Atomizer Design

Tatschl, R.
PRIMARY BREAK-UP MODEL FOR DIESEL JETS BASED ON LOCALLY RESOLVED FLOW FIELD IN THE INJECTION HOLE
E. v. Berg, A. Alajbegovic, D. Greif, A. Poredos,
R. Tatschl, E. Winklhofer and L.C. Ganippa
 
 Spray Modelling

Taylor, A.M.K.P.
COMPARISON OF FRONT-TRACKING AND FRONT-CAPTURING COMPUTATIONS WITH EXPERIMENTAL DATA OF DROPLET IMPACT ONTO SHALLOW LIQUID POOLS
Yannis Hardalupas, H. Pergamalis, A.M.K.P. Taylor, G.E. Cossali
and M. Marengo
 
 Spray Impact on Walls

Terekhov, Victor
DEPOSITION OF LIQUID FILMS FROM NEAR-WALL SPRAY JETS IN A CYLINDRICAL CHANNEL
Victor Terekhov, K.A. Sharov, A.F. Serov and A.D. Nazarov
 
 Spray Deposition

Torres Sanchez, P. L.
BUBBLE PRODUCTION OCCURRING ON THE PERIODIC IMPACT OF VISCOUS DROPS
P. L. Torres Sanchez, Humberto Chaves and F. Obermeier
 
 Spray Impact on Walls

Triballier, K.
RELATIONS BETWEEN INTERNAL FLOW STRUCTURES AND DISINTEGRAZTION PROCESSES IN SPRAY FORMATION.
K. Triballier, J. Cousin and Christophe Dumouchel
 
 Engine Sprays

Trinh, Chinh Minh
A COMPUTATIONAL AND EXPERIMENTAL STUDY OF THE INTERNAL FLOW IN A SCALED PRESSURE-SWIRL ATOMIZER
Kim Granly Hansen, Jesper Madsen, Chinh Minh Trinh,
Claus H. Ibsen, Tron Solberg and Bjorn H. Hjertager
 
 Atomizer Design

Tropea, Cam
FLOW ON A WALL SURFACE DUE TO SPRAY IMPACT
Ilia Roisman and Cam Tropea
 
 Spray Impact on Walls
INFLUENCE OF TURBULENCE ON THE STABILITY OF LIQUID SHEETS
K. Heukelbach, S. Jakirlic, R. Nakic and Cam Tropea
 
 Sheet Instabilities

Tuck, Clive
PARTICLE SIZE CHARACTERISATION OF AGRICULTURAL SPRAYS USING LASER DIFFRACTION
Paul Kippax, Steve Parkin and Clive Tuck
 
 Agricultural
PERFORMANCE OF HYDRAULIC AND ROTARY ATOMISERS FOR MOSQUITO SPRAYING
A.J. Hewitt, W. Jany, N. Woods, G. Dorr and Clive Tuck
 
 Agricultural

 
U up

Ueyama, Koji
APPLICATION OF SHADOW DOPPLER VELOCIMETRY TO ARBITRARY-SHAPED DROPLET MEASUREMENT IN WATER SPRAY
Kazuaki Matsuura, Minoru Komaki and Koji Ueyama
 
 Spray Diagnostics

 
V up

Vanni, Marco
CFD MODELLING OF IMPACT AND SPREADING OF DROPLETS ON A SMOOTH SURFACE
Mirko Garbero, Marco Vanni and Giancarlo Baldi
 
 Spray Impact on Walls

Versteeg, H.K.
NEAR-ORIFICE PDA MEASUREMENTS AND ATOMISATION MECHANISM OF A PHARMACEUTICAL PRESSURISED METERED DOSE INHALER
G. Wigley, H.K. Versteeg and D. Hodson
 
 Medical
NEAR-ORIFICE SPRAY AND VALVE FLOW REGIME OF A PHARMACEUTICAL PRESSURISED METERED DOSE INHALER
H.K. Versteeg and G.K. Hargrave
 
 Medical

Volpp, A.
INJECTION CHARACTERISTICS ON THE SURFACE OF A LIQUID JET IN A WIND TUNNEL
R. Branam, M. Hammou, A. Volpp and W. Mayer
 
 Posters

von Lavante, Ernst
INVESTIGATION OF UNSTEADY EFFECTS IN PRESSURE SWIRL ATOMIZERS
Ernst von Lavante, U. Maatje and F. O. Albina
 
 Spray Modelling

 
W up

Walzel, Peter
SAMPLE INTRODUCTION IN ATOMIC EMISSION SPECTROMETRY (AES). DIFFERENT PNEUMATIC NEBULIZERS AT COMPARABLE OPERATING CONDITIONS
Sascha Groom, H. Wiggers and Peter Walzel
 
 Atomizer Design
LAMELLA DISINTEGRATION AT SHEET FORMING NOZZLES, ESTIMATES FOR DROP SIZES
Peter Walzel and Peter Broll
 
 Sheet Instabilities
SPRAY DRYING OF SUSPENSIONS USING FLASH-EVAPORATION
Karsten Monse, Tanja Linnepe, Sascha Groom and Peter Walzel
 
 Posters
PRODUCING MONOSIZED DROPLETS BY VIBRATIONAL EXCITATED PNEUMATIC NOZZLES
Tanja Linnepe, M. Heitkamp and Peter Walzel
 
 Posters

Warnatz, J.
NUMERICAL INVESTIGATION OF DROPLET HEATING, VAPORIZATION, AND IGNITION OF METHANOL AND LOX DROPLETS IN A CONVECTIVE FLOW FIELD
Y. Aouina, E. Gutheil, U. Maas, U. Riedel and J. Warnatz
 
 Cryogenic

Warnecke, Hans-Joachim
MODELLING AND SIMULATION OF THE DISINTEGRATION PROCESS IN AN ULTRASONIC STANDING WAVE ATOMIZER
Oliver Reipschläger, Dieter Bothe, Hans-Joachim Warnecke,
Burkhard Monien, Jan Prüss and Bernhard Weigand
 
 Ultrasonic
THE EFFECT OF NON-NEWTONIAN FLOW BEHAVIOUR ON BINARY DROPLET COLLISIONS: VOF-SIMULATION AND EXPERIMENTAL ANALYSIS
Michael Motzigemba, Norbert Roth, Dieter Bothe,
Hans-Joachim Warnecke, Jan Prüss, K. Wielage and Bernhard Weigand
 
 Droplet Collisions

Watanabe, J.
SECONDARY DROPLET ATOMISATION FROM SINGLE DROP IMPACTS ON HEATED SURFACES
G.E. Cossali, M. Marengo, M. Santini and J. Watanabe
 
 Spray Impact on Walls

Watkins, Paul
DEVELOPMENT OF A SPRAY WALL IMPACTION MODEL WITHOUT DISCRETISATION INTO DROPLET SIZE CLASSES
Eduardo Lemini and Paul Watkins
 
 Spray Impact on Walls
APPLICATION OF A LAMINAR FLAMELET COMBUSTION MODEL TO LPG AND DIESEL SPRAYS
Albert Yoong and Paul Watkins
 
 Spray Combustion

Weigand, Bernhard
MODELLING AND SIMULATION OF THE DISINTEGRATION PROCESS IN AN ULTRASONIC STANDING WAVE ATOMIZER
Oliver Reipschläger, Dieter Bothe, Hans-Joachim Warnecke,
Burkhard Monien, Jan Prüss and Bernhard Weigand
 
 Ultrasonic
TRANSIENT 3D SIMULATION OF HEAT TRANSFER FROM SPHERICAL AND STRONGLY DEFORMED DROPLETS AT HIGH REYNOLDS NUMBERS
M. Hase and Bernhard Weigand
 
 Spray Modelling
THE EFFECT OF NON-NEWTONIAN FLOW BEHAVIOUR ON BINARY DROPLET COLLISIONS: VOF-SIMULATION AND EXPERIMENTAL ANALYSIS
Michael Motzigemba, Norbert Roth, Dieter Bothe,
Hans-Joachim Warnecke, Jan Prüss, K. Wielage and Bernhard Weigand
 
 Droplet Collisions

Weiss, Christian
INFLUENCE OF THE GEOMETRICAL ARRANGEMENT OF THE PHASE CONTACT ON OPERATING CONDITIONS OF INTERNAL MIXING ATOMIZERS
Martin Dopler, Christian Weiss and Werner Kepplinger
 
 Posters

White, T. R.
MIXING OF CO-AXIAL NATURAL GAS/LIQUID DIESEL FUEL SPRAYS
T. R. White and Brian Milton
 
 Posters

Wielage, K.
THE EFFECT OF NON-NEWTONIAN FLOW BEHAVIOUR ON BINARY DROPLET COLLISIONS: VOF-SIMULATION AND EXPERIMENTAL ANALYSIS
Michael Motzigemba, Norbert Roth, Dieter Bothe,
Hans-Joachim Warnecke, Jan Prüss, K. Wielage and Bernhard Weigand
 
 Droplet Collisions

Wiggers, H.
SAMPLE INTRODUCTION IN ATOMIC EMISSION SPECTROMETRY (AES). DIFFERENT PNEUMATIC NEBULIZERS AT COMPARABLE OPERATING CONDITIONS
Sascha Groom, H. Wiggers and Peter Walzel
 
 Atomizer Design

Wigley, G.
NEAR-ORIFICE PDA MEASUREMENTS AND ATOMISATION MECHANISM OF A PHARMACEUTICAL PRESSURISED METERED DOSE INHALER
G. Wigley, H.K. Versteeg and D. Hodson
 
 Medical

Winklhofer, E.
PRIMARY BREAK-UP MODEL FOR DIESEL JETS BASED ON LOCALLY RESOLVED FLOW FIELD IN THE INJECTION HOLE
E. v. Berg, A. Alajbegovic, D. Greif, A. Poredos,
R. Tatschl, E. Winklhofer and L.C. Ganippa
 
 Spray Modelling

Wittig, S.
A MULTI-COMPONENT DROPLET EVAPORATION MODEL FOR REAL AVIATION FUELS AT ELEVATED PRESSURES
Matthias Burger, Roland Schmehl, P. Prommersberger, O. Schaefer,
R. Koch and S. Wittig
 
 Gas Turbines

Woods, N.
PERFORMANCE OF HYDRAULIC AND ROTARY ATOMISERS FOR MOSQUITO SPRAYING
A.J. Hewitt, W. Jany, N. Woods, G. Dorr and Clive Tuck
 
 Agricultural

 
Y up

Yamaguchi, M.
MOLECULAR DYNAMIC SIMULATION OF AN ELECTROHYDRODYNAMIC LIQUID JET
Tomoya Funakawa, M. Yamaguchi, H. Kumamaru, W. Balachandran and
Z. Huneiti
 
 Electrosprays

Yan, B.
APPLICATIONS OF ATOMIZATION AND SPRAY PROCESSES IN STEEL INDUSTRY
Jing Guo Zhang and B. Yan
 
 Metal Manufacturing

Yarin, A.L.
SPRAY FORMATION THROUGH LIQUID SHEET BREAK-UP CONTROLLED BY VIBRATIONAL EXCITATION
Günter Brenn, Z. Prebeg and A.L. Yarin
 
 Sheet Instabilities

Yasuda, Yhu
SPATIAL VELOCITY MEASUREMENT OF INTERNAL CAVITATING FLOW AND CHARACTERISTICS OF LIQUID JET ATOMIZATION OF 2-D HOLE NOZZLE
Tetsuya Oda and Yhu Yasuda
 
 Engine Sprays

Ye, Q.
SIMULATION OF THE SPRAY COATING PROCESS USING A PNEUMATIC ATOMIZER
Q. Ye, Joachim Domnick and E. Khalifa
 
 Spray Deposition

Yerakhavets, S.G.
RHEOLOGICAL MODEL OF COMPOSITE SLIDING BEARING COMPRISING HARD COATING ON SOFT POLYMER INTERLAYER
M.V. Kireitseu, S.G. Yerakhavets, Ion Nemerenco, M. Istomin,
M.A. Belotserkovski and A. Fedaravichus
 
 Spray Deposition

Yon, Jérôme
EXTERNAL AND INTERNAL BEHAVIOR OF THE NEAR FIELD DIESEL JET AT HIGH INJECTION PRESSURE : DUAL SOURCE VISUALIZATION AND A MULTIPLE ANGLES TOMOGRAPHIC EXPERIMENTS.
Jérôme Yon, Jean-Bernard Blaisot and Michel Ledoux
 
 Engine Sprays

Yoong, Albert
APPLICATION OF A LAMINAR FLAMELET COMBUSTION MODEL TO LPG AND DIESEL SPRAYS
Albert Yoong and Paul Watkins
 
 Spray Combustion

Yule, A. J.
AN ALTERNATIVE SPRAY PRODUCTION METHOD FOR PRESSURIZED METERED DOSE INHALER
Yusuf Al-Suleimani and A. J. Yule
 
 Medical
A NOVEL SPRAY CONFINEMENT TECHNIQUE FOR MEDICAL SPRAYS: DETAILED IVESTIGATIVE MEASUREMENTS OF SIX GEMETRICAL CONFIGURATIONS
Yusuf Al-Suleimani, Hassan M. Abduljalil and A. J. Yule
 
 Medical
A NOVEL SPRAY CONFINEMENT TECHNIQUE FOR MEDICAL SPRAYS: ADVANCED PROCESSING AND CORRELATION WITH TIMP MEASUREMENTS
Hassan M. Abduljalil, Yusuf Al-Suleimani and A. J. Yule
 
 Medical
NOVEL DEVELOPMENTS IN ACTUATOR DESIGNS FOR FLASHING HOUSEHOLD AEROSOLS
R. A. Sharief, A. J. Yule and K. Laidler
 
 Atomizer Design
A CFD PREDICTION OF WAVE DEVELOPMENT AND DROPLET PRODUCTION ON SURFACE UNDER ULTRASONIC EXCITATION
Yusuf Al-Suleimani and A. J. Yule
 
 Ultrasonic

 
Z up

Zhang, Jing Guo
APPLICATIONS OF ATOMIZATION AND SPRAY PROCESSES IN STEEL INDUSTRY
Jing Guo Zhang and B. Yan
 
 Metal Manufacturing

Ziskind, G.
DRAG FORCE ON A HEATED SPHERE
D. Katoshevski, G. Ziskind, E. Mograbi and E. Bar-Ziv
 
 Posters