|
SUNDAY –
SEPTEMBER 9, 2007
WELCOME COCKTAIL at 20:45
Yucelen
HOTEL, Akyaka-Gokova
|
|
MONDAY – SEPTEMBER 10, 2007
|
|
08:00-09:00
|
Registration
|
|
09:00-10:30
|
Opening Ceremony
|
|
10:30-11:00
|
Coffee Break
|
|
11:00–12:00
|
Chair: I Gökalp
Conference
Hall- B
|
|
The modelling of liquid sprays in
industrial applications using CFD codes (Invited lecture)
|
Philip Stopford
ANSYS Europe Ltd. UK
|
|
12:00-14:00
|
Lunch Break
|
|
13:00-14:00
|
*Meeting
of the Editorial Board of Atomization and Sprays
|
|
|
Sprays
and Atomization in Internal Combustion Engines (1)
Conference
Hall- B
|
Spray Modelling (1)
Conference
Hall- C
|
Droplet Wall Interactions
Conference
Hall- D
|
|
Chair: Semih Eser
|
Chair: Philip Stopford
|
Chair: Antonio Lozano
|
|
14:00-14:20
|
X-Ray
measurements of the mass distribution in the dense primary break-up region of the spray from a
standard multi-hole common-rail
diesel injection system
P. Leick, T. Riedel, G.
Bittlinger, C.F. Powella, A.L.Kastengrena, J. Wang
|
Numerical simulation of unsteady nozzle
flow and spray formation under diesel engine conditions
M. Konstantinov,
C. Wagner
|
Considerations in measurement and
modelling of spray transport phenomena with wall interaction
D. Kalantari
|
|
14:20-14:40
|
Polygonal splashing structures by
diesel jet impingement on the solid wall
M.
Weclas, J. Cypris
|
Towards large Eddy simulation of
diesel fuel spray using an Eulerian-Eulerian approach
L.
Martinez, A. Benkenida,
B.
Cuenot
|
Thermal
induced atomization and heat transfer in drop impacts against surface
enhanced heated targets
A. S. Moita, A. L. N. Moreira
|
|
14:40-15:00
|
Practical study on high-dispersion and
high-penetration diesel injection nozzle
N.
Tamaki, Y. Nishida, T. Hosokawa
|
Using PDA data to validate the CFD
models of three airblast atomizer designs
M.
Burby, A.J. Yule, G.G.Nasr, A. Wheatley
|
Modelling of liquid films formed by
sprays impinging onto solid walls
M.
Spathopolou, M. Gavaises, S. Tonini, A. Bisighini, G.E. Cossali, M. Marengo,
A. Theodorakakos
|
|
15:00-15:20
|
Capturing the thermal radiation of
burning diesel sprays in a pressurized chamber
A. Pawlowski, R. Kneer
|
Coupled
joint PDF and spray flamelet modeling for Methanol and Ethanol/Air spray
combustion
|
Analysis of droplet wall interaction
using advanced image processing techniques
A. Müller, F. Schumann, K.
Dullenkopf, H.-J. Bauer
|
|
15:30-16:00
|
Coffee Break
|
|
|
Droplet
Impact, Collision, Break-up
Conference
Hall- B
|
Spray
Modelling (2)
Conference
Hall- C
|
Sprays
and Atomization in Internal Combustion Engines (2)
Conference
Hall- D
|
|
Chair: Rafaello Ragucci
|
Chair: Eva Gutheil
|
Chair: Gilles Bruneaux
|
|
16:00-16:20
|
Droplet collision outcomes at high
Weber number
N. Roth, C. Rabe, B. Weigand, F.
Feuillebois, J. Malet
|
The study of spray structure by
numerical simulation-spatial inhomogeneity of droplets in spray
S. Okajima, N. Tokuoka
|
PIV measurement of injection pressure
influence on gas entrainment in
GDI-engine
B. Prosperi, J. Hélie, R. Bazile
|
|
16:20-16:40
|
Transition of spatial inhomogeneity of
droplets in spray
K.Kuno, N. Tokuoka
|
CFD
calculations and experiments of droplet interactions in two flat-type nozzle
sprays
S.Stübing, M.Sommerfeld |
Correlations
for prediction of diesel fuel spray penetration
Soo-Young
No
|
|
16:40-17:00
|
An experimental study of the crater
evolution by impact of a drop onto a shallow pool
N. van Hinsberg* I. V. Roisman, C. Tropea
|
CFD predictions and comparisons with
experimental data for a conducted hollow-cone sprays
|
Effect of dwell time on
multi-component fuel vaporization of high-pressure diesel sprays injected
from cylindrical and reverse tapered multi-hole nozzles
S. Tonini, E. Giannadakis, M. Gavaises, A. Theodorakakos, G.E.
Cossali, M. Marengo
|
|
17:00-17:20
|
Binary collisions of droplets with fluid and suspension particles
O. Kurt, U. Fritsching,
G. Schulte
|
|
|
|
17:30-18:30
|
*
Meeting of International Task Force
|
|
18:30-20:30
|
Conference Cocktail
|
|
Tuesday – SEPTEMBER 11, 2007
|
|
08:00-09:30
|
Registration
|
|
09:30-10:30
|
Chair: Norman Chigier
Conference
Hall- B
|
|
Ideal sprays for new generation of
automotive engines (Invited lecture)
|
Christine Mounaim
Université
d'Orléans, France
Gilles Bruneaux
Institut
Français du Pétrole,
Rueil-Malmaison, France
|
|
10:30-11:00
|
Coffee Break
|
|
|
Spray Modelling (3)
Conference
Hall- B
|
Spray Applications (1)
Conference
Hall- C
|
Spray Formation and Atomization (1)
Conference
Hall- D
|
|
Chair: S. Onbasioglu
|
Chair: A. Vallet
|
Chair: Mehmet
Gunes
|
|
11:00-11:20
|
Maximizing
energy efficiency and minimizing formation of pollutants in combustion
engines and industrial furnaces by controlling fuel sprays
|
The
design of emergency safety shower heads to comply with the proposed EU
standards
M. Burby, G.G.Nasr,
A.J. Yule, T. Hughes
|
Breakup of a radially expanding
liquid sheet
Z.W. Wang, S.P. Lin
|
|
11:20-11:40
|
Experimental and numerical
investigation of jet penetration and primary atomization in crossflow
R. Ragucci,
A. Bellofiore ,
P. Di Martino, A. Cavaliere
|
The application of fine sprays in the
mass decontamination of
people exposed to chemical, biological, radiological or nuclear (CBRN)
hazards
S.E.C. Lloyd, G.G. Nasr, A.
Whitehead
|
Structure and mass flux distribution
of a side-opened hollow cone spray generated by swirl pressure atomizers
E. Abo-Serie, S. Moon, C. Bae
|
|
11:40-12:00
|
Theoretical considerations on
ultrasound assisted atomization of fluid sheets
|
Utilisation and performance analysis
of fine sprays for disinfection within healthcare
S.E.C. Lloyd, G.M. Coles, G.G.
Nasr, A.J. Yule
|
Use of solvent replacement method to
prepare Sulfur Sol
Ö.E. Kuzugüdenli
|
|
12:00-14:30
Lunch
Break
|
12:00-13:00 ACM Meeting- AKM Meeting Room
|
13:00-14:00 AGM meeting- AKM Meeting Room
|
|
|
|
Spray Formation and Atomization (2)
Conference
Hall- B
|
Droplet Dynamics and Evaporation (1)
Conference
Hall- C
|
Spray Modelling (4)
Conference
Hall- D
|
|
Chair: A. Moreira
|
Chair: Christine Mounaim
|
Chair: G. Nasr
|
|
14:30-14:50
|
Influence of micro-bubbles within
ejected liquid on behavior of cavitating flow inside nozzle hole and liquid
jet atomization
T. Oda, K. Takata,
Y. Yamamoto,
K. Ohsawa
|
Temperature measurements of
evaporating ethanol/3-pentanone bicomponent droplets using 2-colour LIF
V. Deprédurand, C. Maqua, G.
Castanet,
F. Lemoine
|
Fan-spray atomizers analysis through
mathematical modelling
M. Altimira, A. Rivas, R. Antón, G. Sánchez, J. C. Ramos
|
|
14:50-15:10
|
Effect of the inner gas jet on
annular liquid sheet atomization
N. Leboucher, G. Laporte, J. L.
Carreau, F. Roger
|
Why d2-law does not hold
during droplet vaporization in microgravity conditions?
C. Chauveau, I. Gökalp, M.
Birouk
|
Modeling the influence of the nozzle
flow on diesel spray atomization under high pressure injection conditions
J. O. Soriano, M. Sommerfeld, A.
Burkhardt
|
|
15:10:15:30
|
Effect of particle shape on
suspension stability
Ö.E. Kuzugüdenli,
A. Ülgen
|
An electrodynamic trap with an
advanced geometry used for evaporation rate measurements of single water
droplets
C. Heinisch, J. Petter,
N. Damaschke,
T.
Tschudi, C. Tropea
|
Relation between spatial
inhomogeneity of fuel spray and ignition phenomenon
A. Okamura, Y. Mori , N. Tokuoka
|
|
15:30-16:00
|
Coffee Break
|
|
|
Sprays and Atomization in Internal Combustion
Engines (3)
Conference
Hall-B
|
Spray Applications (2)
Conference
Hall- C
|
Experimental Techniques
Conference
Hall- D
|
|
Chair: M Marengo
|
Chair: Hayati Olgun
|
Chair: Oskar Haidn
|
|
16:00-16:20
|
Cold start physical phenomena in
diesel engines
C. Vergnes, F. Foucher, C.
Mounaïm-Rousselle,
B. Jeanne, B. Barbeau, F.
Dabireau
|
Descaling of wellhead production
tubing using high pressure water atomisers
G.G. Nasr, M. Burby
|
Development of a 2-D quantitative LIF
technique for measurement of transient liquid fuel films utilising total
internal reflection
M. Alonso, P.J. Bowen, P.J. Kay,
S. Sapsford
|
|
16:20-16:40
|
Characterization of deposits formed
on diesel injectors in a field test and from thermal oxidative degradation of
n-hexadecane in a laboratory reactor
R. Venkataraman,
S. Eser
|
The characterisation of the spray
from a New and novel design of spill Return© swirl atomiser
S.E.C. Lloyd, G.G.Nasr,
A.J.Yule, M. Burby
|
High speed imaging and CFD simulation
of an hollow cone spray
M.C. Amoresano, M.C. Cameretti,
R. Tuccillo
|
|
16:40-17:00
|
Visualizing high-pressure diesel and
biodiesel sprays with single-shot ultrafast X-ray phase contrast imaging
K. Im, X. Xie, K. Fezzaa, Y.
Wang, W. Keat Lee, Ming-Chia Lai, J. Wang
|
Applications of actuator designs for
aerosols
R. A. Sharief,
H. M. Abduljalil,
G. C. Eales, A.J., Yule, K.Laidler
|
Image statistical analysis procedures
for spray morphology investigation
A. Bellofiore, R. Ragucci, P. Di
Martino,
A. Cavaliere
|
|
17:00-17:20
|
|
Effect of viscosity, surface tension
and nozzle size on atomization in
two-phase nozzles
C.E. Ejim, B.A. Fleck, A.Amirfazli
|
|
|
20:00
|
Conference
Dinner (in MARMARIS Resort Town)
|
|
Wednesday –
SEPTEMBER 12, 2007
|
|
9:30-10:30
|
Chair: A Cavaliere
Conference
Hall- B
|
|
Cryogenic atomization at near-critical
conditions in liquid propellant rocket engines (Invited lecture)
|
Oskar
Haidn
German
Aerospace Center (DLR), Institute of Space Propulsion Lampoldshausen, Germany
|
|
10:30-11:00
|
Coffee Break
|
|
|
Spray Formation and Atomization (3)
Conference
Hall- B
|
Droplet Dynamics and Evaporation (2)
Conference
Hall- C
|
Spray Applications (3)
Conference
Hall- D
|
|
Chair: J. Wang
|
Chair: Fehmi Akgun
|
Chair: Atila Yucel
|
|
11:00-11:20
|
Effervescent atomizer: influence of
the internal geometry on atomization performance
J.
Jedelsky, J. Otaha,
|
Acetone fraction measurements in
bicomponent evaporating droplets using laser-induced fluorescence
C. Maqua, V.Deprédurand,
G. Castanet, F. Lemoine
|
Contribution to the modelling of the
atomization of pesticides
M. De Luca, A. Vallet |
|
11:20-11:40
|
Multiple regime heat transfer
correlation for spray/wall interaction and thermo-induced secondary
atomization characteristics
M. R. O. Panão,
A. L. N. Moreira
|
Droplet transport rates in a
turbulent hot airflow
M. M. Abou Al-Sood,
M. Birouk, I. Gökalp
|
Fundamental principles and designs of
aerosol actuators to cure low voc products
R. A. Sharief, K. Laidler |
|
11:40-12:00
|
Characterization of the effervescent
atomization of glycerin a by-product of biodiesel production
A.P.M. Peixoto,
J.C.F. Teixeira,
M.E.C. Ferreira
|
Droplet structure formation at the
spray edge
J. Heinlein, R. Koerich-Decker, U. Fritsching
|
Effect of processing condition on
size and morphology of Aluminium powder particles prepared via SAMD technique
P. D. Khatibi , F. Akhlaghi
|
|
12:00-14:00
|
Lunch
Break
|
|
|
Spray Applications (4)
Conference
Hall- B
|
Spray Formation and Atomization (4)
Conference
Hall- C
|
|
|
Chair: Sener Oktik
|
Chair: I Gökalp
|
|
|
14:00-14:20
|
Properties of ZnxCd1-xO
films deposited by spray pyrolysis method
N. Kavasoğlu,
A. S. Kavasoğlu,
T. Güngör
|
Design refinements to optimize the
performance of a twin-fluid nozzle with an internal mixing chamber
A. Lozano , F. Barreras, G. Ferreira, E. Lincheta
|
|
|
14:20-14:40
|
Structural and morphological
characterization of ultrasonically sprayed CdS:F films
V. Bilgin, I. Akyüz, E. Ketenci,
S. Kose, F. Atay
|
Using partitions technique to enhance
spray atomization
R. A. Sharief,
G. C. ,Eales
H. M. Abduljalil,
K. Laidler
|
|
|
14:40-15:00
|
Evaluation of the empirical
spray/wall interaction models
|
Dantec’s presantation
G. Ergin
|
|
|
15:00-15:30
|
Coffee
Break
|
|
15:30-16:00
|
Closing Session
|
|
|
|
|
|
|
|
|
|
|